017.jpg - 94.6 KB - Views: 63
Posted by: KRProton on Apr 11, 2012 10:54 PM
 
015.jpg
I soldered on my own wires (cut from discarded servo extension wires).
<<
016.jpg
You'll need to cut some holes for guiding some of the wires. A 1/8" brass tube sharpened on the end cuts well. Sharpen the outside with a fiber-reinforced cutoff wheel and sharpen the inside with a #11 blade. Cuts like "butta."
<
017.jpg
*
018.jpg
>
019.jpg
>>