The 2 clamps, screws, and washers. Note position of the UBEC. Near the bottom of the booster. If mounted too high, it will press the binding button on the back of the transmitter.

100_1768a.jpg - 78.3 KB - Views: 2,504
Posted by: Crist Rigotti on May 19, 2010 11:09 PM
The 2 clamps, screws, and washers.  Note position of the UBEC.  Near the bottom of the booster.  If mounted too high, it will press the binding button on the back of the transmitter.
 
100_1764a.jpg
The switched battery wires as they come through the battery compartment. When not using the booster, these wires can be tucked back into the battery compartment.
<<
100_1765a.jpg
The upper LH corner is chamfered for the wires.
<
100_1768a.jpg
*
100_1770a.jpg
Front view showing the coax routing.
>
100_1772a.jpg
Back view showing the general layout of things. I tried to keep everything in the middle so nothing interferes with my hands.
>>