The connectors from the motor are male 2.0MM and from the escape female 3.5MM.

SE5a 024.jpg - 21.8 KB - Views: 933
Posted by: Michael Heer on Oct 15, 2006 05:37 PM
The connectors from the motor are male 2.0MM and from the escape female 3.5MM.
 
SE5a 020.jpg
The covering removed from the stabilizers to allow the wood to be glued to the fuselage.
<<
 		SE5a 022.jpg
The Berg 7 receiver with the Azarr antenna attached.
<
 		SE5a 024.jpg
*
 SE5a 025.jpg
Electrifly makes a Bullet Adaptor model GPMM3122 that allows you to plug the motors and escape together with no soldering.
>
 		SE5_5.jpg
>>

« Previous 5 Attachments | Next 5 Attachments »

Castle Creations      DRIVE / FLY / SUPPORT