Reversed Controls for Futaba T6EXHP and PhoenixRC Sim

[flythai]

Hello, Got the Phoenix Software installed and I''m able to fly in the PhoenixRC Sim with latest updates (as of Jan 6 2009). Problem I'm having is everything is reversed. If I bank Right with the controls I go left and vice Versa, If I throttle up the throttle goes down. When I hit the Thr cut button it goes full throttle.

Is there a fix for this other than turning the Fut RC upside down?

Thanks in advance...

[dschilling]

Hi I have the same problem with my E SKY 0905A controller. Anyone have a fix.????? I've heard to calibrate the sim tx with windows/device, but I don't know how to do that. Any help would be appreciated. Also the sensitivity of the sticks is really touchy. Think control input and you have too much. Thanks, David

[Marcinb]

Here's what I do.
I have a not-so-sophisticated radio, but it works for me.
Since the Tx has a 10 model memory, use one model memory for the sim. Go to it, and REVERSE all your controls on the Tx. Save that as one of your "Models" Then when you want to play the sim, just select that "Model" and go. It SHOULD work. You can't reverse in the game, so reverse on the Tx.

OR you could set up failures so that each channel reverses. This could work to, but you will have to do it each flight.
So just go to flight failures and set channel reverse.

I use Realflight, and it works for me, but I don't see any reason why it shouldn't work for you.

[Stan Peterson]

Use the System > Your Controls > New > Quick Setup and follow the instructions - that will create a new profile for the transmitter - dead easy no mucking around needed!