Hitec mini6s

[teddiepos10]

Will mini 6s 6 channel receiver work on a nitro .25 HOB P-51 Mustang?

Any suggestions welcome. Trying to fill order with Tower Hobbies and I've heard the GWS Pico is not sutiable for this applcaition.. Building on a small budget..

[A.T.]

Will mini 6s 6 channel receiver work on a nitro .25 HOB P-51 Mustang? Any suggestions welcome. Trying to fill order with Tower Hobbies and I've heard the GWS Pico is not sutiable for this applcaition.. Building on a small budget..
HFS-06MT known as the Hitec Mini 6S in USA (http://www.hitecrcd.com/receivers/show?name=Mini-6S) quote
"The MINI-6 receiver meets or exceeds the performance level of any FM single conversion aircraft receiver on the market today. The Mini-6 provides glitch free performance in a small package making it the perfect choice for any application where a full range micro receiver is desirable." unquote.
Provided a Hitec single conversion receiver crystal is used and following the golden rule of TX On First TX Off Last, to ensure the Auto gain Control is enabled, I would not hesitate to use this receiver in your application. ( Note: Not compatible with 9Z if using the synthesized module.)
Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links (http://homepages.ihug.co.nz/~atong)

[teddiepos10]

Thank you very much for the information... I was concerned.. advertisments and real world do not always match... I am using a 4 channel tower hobbies TX so everything should match up pretty well... I ordered the receiver and several other items so hopefully the build will begin in a week... Once again thank you...