helisafestuff
Dec 27, 2008, 11:41 AM
We are pleased to announce our latest helicopter flight training, test, and set-up stand for 2009.
This is our Supreme Model 2834072. The stand offers a 72" diameter flying area and is designed for outdoor ground use and/or indoors in large rooms or open spaces.
The helicopter is positioned off the ground at rest, with the main rotor blades approx. 24" high. At maximum operating height the heli rises to approx. 38", measured at the rotor blades. The stand design eliminates unwanted "ground effect" on the rotors so you fly in clean air, and this gives you full control over the heli. Our unique floating skid holder eliminates any "ground resonance" problems.
The Supreme stand comes self balance, so the heli carries no extra weight during operation. The stand is designed for heli Class 370, 380, 400, and 450 helis having main rotor blades under 30" in diameter.
A special adjusting knob allows the heli to pitch and roll, crab, fly forward and backward, and to be locked rigid for adjustments. Nose-in and nose-out hovering is easy as well, and flight practice in wind is now possible without any fly-away worries. Also good for testing flight stabilization systems like co-pilot, etc.
This is the safe way to operate your heli and to get the "feel" of it prior flying freely. Smaller stands also available.
Visit our website for more information and please email any questions.
David Howard, Sales
Heli-Safe Products, Inc
www.helisafeproducts.com
This is our Supreme Model 2834072. The stand offers a 72" diameter flying area and is designed for outdoor ground use and/or indoors in large rooms or open spaces.
The helicopter is positioned off the ground at rest, with the main rotor blades approx. 24" high. At maximum operating height the heli rises to approx. 38", measured at the rotor blades. The stand design eliminates unwanted "ground effect" on the rotors so you fly in clean air, and this gives you full control over the heli. Our unique floating skid holder eliminates any "ground resonance" problems.
The Supreme stand comes self balance, so the heli carries no extra weight during operation. The stand is designed for heli Class 370, 380, 400, and 450 helis having main rotor blades under 30" in diameter.
A special adjusting knob allows the heli to pitch and roll, crab, fly forward and backward, and to be locked rigid for adjustments. Nose-in and nose-out hovering is easy as well, and flight practice in wind is now possible without any fly-away worries. Also good for testing flight stabilization systems like co-pilot, etc.
This is the safe way to operate your heli and to get the "feel" of it prior flying freely. Smaller stands also available.
Visit our website for more information and please email any questions.
David Howard, Sales
Heli-Safe Products, Inc
www.helisafeproducts.com