Best Motor for Logo 500 (and servo)

[vpersiani]

Hello,

Which motor would you recommend for a Logo 500?
I was planning to carry over the Logo 10 setup that I have Hacker A30-8XL on 4S but even though there are many common parts, from what I have read this would be a very weak setup for the Logo 500.
So I believe I will go for 6S, the question is then which motor to choose.
Also any experience on cyclic servos would be appreciated.

Thanks,

Vincent

[vpersiani]

Anybody there?
Nobody wants to talk to me about Hacker, Z-Power1100, Tango 10-45, Scorpion HK4020, HK4025 or any other?

Vincent

[Tean]

6s motors I've tried:
Z30A-1100, very good
Orbit 25-10, about the same as Z30, but more expensive
Tango 45-10, OK, but much better on 8s. Expensive.
Neu 1910-1Y (no fan), very good but gets hot.

Scorpion 4020-1100, No personal experience of this but heard good things.
Video here (http://www.vimeo.com/1799734)

Aslo consider some 8s setups:
Z30-800 or Orbit 25-12 or Scorpion 4025 890

Servos:
Ino HG-D760MG would be my choice.

[OICU812]

Scorpion 4020-1100, 14-15 tooth for sport and 3D, 16 tooth for crazy HS and 3D.

[vpersiani]

Thanks for the feedback guys.
The good news for my budget is that you don't seem to recommend the so expensive Tango at least for 6S setup!

[vpersiani]

Scorpion 4020-1100, 14-15 tooth for sport and 3D, 16 tooth for crazy HS and 3D.
If you are talking 6S, I suppose that you are using 153teeth M07 main gear.

Is that correct?

Vincent

[arclite5]

If you are talking 6S, I suppose that you are using 153teeth M07 main gear.

Is that correct?

Vincent

HK4025 890kv is the one I've used.. It's extremely powerful on 6s using the 153t M07 Main gear. I don't remember exactly which pinion but I believe it's the 16t.

BLS451 or JR DS8717's are the two best servos out right now in my opinion.