Power 110 Bench Stand Test

[bfischer]

Finally got by Zippy Lipos from Hong Kong and put my Power 110 through its first work out...

Built the bench stand during free time over Thanksgiving (while all the grandparents and kids were taking their naps).

E-flite Power 110
CC HV85
Ultimate BEC
Zippy 4+5S 25C 5000mah lipos
APC 15.75x13 3-Blade Propeller (2nd test will be Master Airscrew 16x10 3-Blade)

2755 Watts/83amps WOT... I hid behind a shelf once I got it past half throttle!

This is going into my TF P-40E... From the test, it seems like this monster should be able to pull it out of my hands vertically...

http://i4.photobucket.com/albums/y127/blfischer/Power110TestStand-1.jpg

http://i4.photobucket.com/albums/y127/blfischer/TowerProBellvsPower110.jpg

Picture of my test bench and my first brushless motor that I had in an E-starter for comparison... we have come a long way...

Thanks to all who gave me the advice I seeked on this forum!

[panolaboy]

got a 110 on a old midwest AT-6, using 9s/5000 , weldgard 100 esc. This plane doesn't fly scale. for a 14.6 lbs rtf. take off roll is about 20', and it will go stright up to a speck in the sky. I have a hanger 9 Sundowner with a 160 on it and the T-6 will go by it like it is setting still? Do you have any idea on the programing ? Using 10s / with casl 110 hv , 17/12 apc

[bfischer]

You reminded me I haven't even hooked this up to the castle link yet...