JJC Horn module

[fatboy999]

Is there any way to reset the JJC Horn module back to the basic setup program? I think that I accidently locked in all 3 sounds and want to reset the unit and start over.

[patmat2350]

There is no "locked in".
Paraphrasing the instrux:
1. Turn on & push set up button within 5 sec.
2. Each of the three programmed sounds will play in succession.
3. While a sound is playing, press the set up button again to select it. 1, 2, or all 3 can be so selected.
4. If more that 1 is selected, they'll be played in order (one at a time) each time you activate the sound module from the radio.

Pat M

[tallships232]

1. Turn on the transmitter.
2. Turn on the receiver.
3. To enter set up mode, press the set up button within the first
5 secs. If you do not press the set up button the unit will
continue with normal power on and after 5 secs the unit will be
ready for normal operation.
4. Once in set up mode, each of the three sounds will be played
in sequence. Press the set up button to select the sound that is
playing. The unit will acknowledge your button press by flashing
the status light once.
5. You can select one, two or all three of the sounds by pressing
the set up button whilst the sound is playing during the set up
sequence.
6. At the end of the set up sequence the status light will flash
every second to indicate the unit is ready for operation. Unless
in the future you wish to change the sound selections you have
made, you will not need to access the set up routine again.