acrc
Nov 10, 2008, 10:33 AM
You can balance the battery while charge, discharge or at stand alone mode. you still can take DB8 as cell meter to check your battery status.
Nixie display indicator display each cell voltage, battery pack voltage, difference of cell voltage and the balance state of the battery pack.
http://www.ac-rc.com/images/original_size/chargery_power/DB8_battery_selection.jpg
http://www.ac-rc.com/images/original_size/chargery_power/DB8_display.jpg
Cooperating with charger, the built-in software can detect the cell voltage in charging. When any cell voltage reaches 4.22V, it will cut off the charger to prevent the battery overcharged.
Besides independent balance mode, you can connect any LiPo or LiFe charger to the input lead first, then connect the DB8 to the balance connector on your pack, finally connect the output leads to the discharge wire of the pack. so your pack is charging at up to 10A and balancing simultaneously.
Feature
-Automatically detect and display battery balance status for any 2 to 8 cells pack
-Imbalance voltage warning and balancing
-Audio alarm for over voltage
-Audio alarm for under voltage
-Nixie display indicator display each cell in balancing
-Automatically cut-off the charging circuit while charge
-Reversely polarity protection on input, output and balance connector
-Balance 1 or 2 - 4 battery packs simultaneously
-With Special Connector Conversion Board(CCB-9KT) to fit all kinds of XH type battery connectors
2 working mode:
-Stand-alone balancing
-Balancing while charge or discharge, need to be connected to 8S or below professional charger.
Input/Output Specifications:
Input Voltage/Current: DC 35V, 10 A MAX.
Output Voltage: 35V MAX.
Output Current: 10A MAX.
Current drain for balancing : 300mA/cell
Balance accuracy : <10mV
*capable to balance or charge with multiple combination of Chargery Power, Kokam, Graupner, Align and Dualsky batteries simultaneously(allow different voltage and capacity of batteries) as below:
4*2S
2*3S + 2S
2*4S
2*4S + 3S
5S + 3S
6S + 2S
http://www.ac-rc.com/images/original_size/chargery_power/DB8-balance_demontration.jpg
Nixie display indicator display each cell voltage, battery pack voltage, difference of cell voltage and the balance state of the battery pack.
http://www.ac-rc.com/images/original_size/chargery_power/DB8_battery_selection.jpg
http://www.ac-rc.com/images/original_size/chargery_power/DB8_display.jpg
Cooperating with charger, the built-in software can detect the cell voltage in charging. When any cell voltage reaches 4.22V, it will cut off the charger to prevent the battery overcharged.
Besides independent balance mode, you can connect any LiPo or LiFe charger to the input lead first, then connect the DB8 to the balance connector on your pack, finally connect the output leads to the discharge wire of the pack. so your pack is charging at up to 10A and balancing simultaneously.
Feature
-Automatically detect and display battery balance status for any 2 to 8 cells pack
-Imbalance voltage warning and balancing
-Audio alarm for over voltage
-Audio alarm for under voltage
-Nixie display indicator display each cell in balancing
-Automatically cut-off the charging circuit while charge
-Reversely polarity protection on input, output and balance connector
-Balance 1 or 2 - 4 battery packs simultaneously
-With Special Connector Conversion Board(CCB-9KT) to fit all kinds of XH type battery connectors
2 working mode:
-Stand-alone balancing
-Balancing while charge or discharge, need to be connected to 8S or below professional charger.
Input/Output Specifications:
Input Voltage/Current: DC 35V, 10 A MAX.
Output Voltage: 35V MAX.
Output Current: 10A MAX.
Current drain for balancing : 300mA/cell
Balance accuracy : <10mV
*capable to balance or charge with multiple combination of Chargery Power, Kokam, Graupner, Align and Dualsky batteries simultaneously(allow different voltage and capacity of batteries) as below:
4*2S
2*3S + 2S
2*4S
2*4S + 3S
5S + 3S
6S + 2S
http://www.ac-rc.com/images/original_size/chargery_power/DB8-balance_demontration.jpg