four blade prop needed for 80" Spit

[staggerwing]

Does anyone know the source for a four blade prop that would approxamately equal an APCE 20 X 10 @ 5500 RPM ?
Waiting on an inquiry ans from APC

FYI, will be going in this --
http://www.thewingsmaker.com/airplane_details.php?code=GA026

Thks
Bob

[Yardbee]

Hi Bob: www.e-flightline.com Carries A Complete Line Of Vario-Props, From 2 Blade Thru 4 Blade Scale Type Propellers. Jeff Might Have What You Need.

Good Luck: JP :)

[staggerwing]

Hi Bob: www.e-flightline.com Carries A Complete Line Of Vario-Props, From 2 Blade Thru 4 Blade Scale Type Propellers. Jeff Might Have What You Need.

Good Luck: JP :)


Thks, but seems they don't have anything for a 12mm mtr shaft.

[Yardbee]

Hi Bob: www.zingerpropeller.com Has a Very Wide Selection Of 4 Bladed Props (Wooden Blades) From 10X4 Thru 28X16 The Hub Appears to Have Plenty Of Room to Bore Out to 12MM.

Good Luck: JP :)

[edible_engine]

i think it would be great for 5 blades on a scale spit :D

[jrb]

W/5: http://www.ramoser.de/home_e/varioprop_e/varioprop_e.html

[staggerwing]

Thks guys--looks like the Zinger is the best bet as I have a huge spinner to cover the clamping plates .

Also like to mention this is an extremely impressive kit for the price--very nice covering job hand shaded, HD pin hinges pre installed (no CA type), decent whls on the HD installed retracts,beautifull split flaps, VG hdwr, nice spinner, canopy & pilot, a clear molded duplicate cowl template,--very complete high quality ARF IMAA qualified all for $321 to my door in a huge box.
Estimated RTF weight w/ (2) 6600 ma 4s in series, Welgard C6364 --15 lbs.
Spit components out of box less fuel stuff---8.4 lbs
I'll post some info & pics when completed