Rebuilding engine

[Sam]

Bought a basket case .21 Ofna Pico 4 port sport engine. (mostly just
disassembled). The question is: does the oiling hole in the con rod face
forward or toward the rear? Imagine it goes toward the front but if anyone
knows different. Also any leads on an exploded parts diagram. Have not
been able to find even with google search.
TIA
SamB

[Phil Bone]

Usually the oil hole faces towards the front...usually.

"Sam" <sbeavin@gte.net> wrote in message
news:odQ5a.8253$ep5.4879@nwrddc02.gnilink.net...
> Bought a basket case .21 Ofna Pico 4 port sport engine. (mostly just
> disassembled). The question is: does the oiling hole in the con rod face
> forward or toward the rear? Imagine it goes toward the front but if
anyone
> knows different. Also any leads on an exploded parts diagram. Have not
> been able to find even with google search.
> TIA
> SamB
>
>

[Sam]

Thanks- had a couple of replies via email- appreciated. It's back together
but not run. If it doesn't work on this engine i'll be sure to post the
info
SamB

"Phil Bone" <philbone@bellsouth.net> wrote in message
news:qq27a.41546$KZ1.33285@fe04.atl2.webusenet.com ...
> Usually the oil hole faces towards the front...usually.
>
> "Sam" <sbeavin@gte.net> wrote in message
> news:odQ5a.8253$ep5.4879@nwrddc02.gnilink.net...
> > Bought a basket case .21 Ofna Pico 4 port sport engine. (mostly just
> > disassembled). The question is: does the oiling hole in the con rod face
> > forward or toward the rear? Imagine it goes toward the front but if
> anyone
> > knows different. Also any leads on an exploded parts diagram. Have not
> > been able to find even with google search.
> > TIA
> > SamB
> >
> >
>
>
>