Four blade head for X-Cell gasser?

[flyguy]

Please recommend some brands of four blade head assemblies for the
X-Cell gasser.

Thanks


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

[Beav]

"flyguy" <fly@bluesky.net> wrote in message
news:3E573285.434B9124@bluesky.net...
> Please recommend some brands of four blade head assemblies for the
> X-Cell gasser.

The Bendix head from Vario would be nice.


--
Beav


Please note my E-mail address is "beavis dot original at ntlworld dot com"
(with the obvious changes)

Beavisland now lives at
www.beavisoriginal.co.uk

[flyguy]

The Vario 4-blade head is a very nice one. It's also one of the most
expensive. I wonder why MA don't make one?

Beav wrote:
>
> "flyguy" <fly@bluesky.net> wrote in message
> news:3E573285.434B9124@bluesky.net...
> > Please recommend some brands of four blade head assemblies for the
> > X-Cell gasser.
>
> The Bendix head from Vario would be nice.
>
> --
> Beav


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

[Beav]

"flyguy" <flyguy@bluesky.net> wrote in message
news:3E581F54.774B877F@bluesky.net...
> The Vario 4-blade head is a very nice one. It's also one of the most
> expensive.

You didn't mention you had a budget :-)

I wonder why MA don't make one?

Probably because they've not had one to copy. They're good at designing
things like that :-))


--
Beav


Please note my E-mail address is "beavis dot original at ntlworld dot com"
(with the obvious changes)

Beavisland now lives at
www.beavisoriginal.co.uk

[flyguy]

I don't mind the initial cost of the Vario 4-blade head. It's the cost
of spares that can get a little much.

Beav wrote:
>
> "flyguy" <flyguy@bluesky.net> wrote in message
> news:3E581F54.774B877F@bluesky.net...
> > The Vario 4-blade head is a very nice one. It's also one of the most
> > expensive.
>
> You didn't mention you had a budget :-)
>
> I wonder why MA don't make one?
>
> Probably because they've not had one to copy. They're good at designing
> things like that :-))
>
> --
> Beav


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

[Beav]

"flyguy" <flyguy@bluesky.net> wrote in message
news:3E58487B.A29F5345@bluesky.net...
> I don't mind the initial cost of the Vario 4-blade head. It's the cost
> of spares that can get a little much.

The heads are very tough, so I don't think parts will be a problem.
Remember, no flybar/flybar cradle, Bell/Hiller mixers, just a bunch of
bearings and 4 holders.


--
Beav


Please note my E-mail address is "beavis dot original at ntlworld dot com"
(with the obvious changes)

Beavisland now lives at
www.beavisoriginal.co.uk