LT-40 CG Location?

[edbuell]

My friend is refurbing an old LT-40.

He has no drawing or manual.

Where should the CG bel located relative to the leading edge?

Thanks to anyone who has the drawing available:)

[Daveairway]

Hi,

I don't have the LT 40 but 25 to 30 percent back from the leading edge should be fine. Also, if the spar is in this area, then CG at the front of the spar to start should be fine.

If you don't get a better answer, start at 25 percent to be safe.

Hope this helps.

Dave