Krill Sebart Katana 28% ?

[jijohans]

Anyone converted this one?
What Hacker setup would match this?

[jfetter]

Anyone converted this one?
What Hacker setup would match this?

I've been dying to do the Krill Katana 33%, I like the 28% too but I prefer the carbon canopy look of the 33% and 39%. For the 28% I'd go with the new Hacker A80, you can certainly do it with less motor (Hacker A60 18L or Axi 5345/18) but the Hacker A80 is a direct replacement for 50cc-to-80cc gas engines and would likey give a 17 lb plane incredible performance. Not as many build threads on the Krills as I would expect, in fact I can't even find much info now that Skyline Aviations web page is dead...

Jack

[jijohans]

Yes,the new A80 sounds like a good choice... Have ordered all the hardware for the Sebart 120 Katana now, soo I will take it from there... With a great amount of overtime on work, the Krill would be in sigth..:)
12S systems on the A80? Wonder if the FP Evo lite 5340 packs would be enough?

[edible_engine]

its got a 120-150A ish current draw on the A80, so you will need high capacity 12s packs. on the krill website, the instruction manual online shows details on a conversion from a guy in germany, very neat job too

Jack, do the 100cc krill on a A150! its great, see my thread here http://www.rcgroups.com/forums/showthread.php?t=865368

[jijohans]

After looking on the spec sheet I was thinking of a A80-8 on 10S 2P (then I can use the packs from the 120) and a Mejzlik 22*12, and land about 100A +

[jijohans]

Hmmm...
http://www.aero-model.com/powersetdetails.aspx?id=eps50

[jijohans]

The plane has been ordered..:) Soo now is the big question on what too put in...
Any thougths on a good and reliable systems? Would prefer Hacker, and I already have 5S 5350mAh and 6S 4270mAh packs...