Fan / Motor for Sapac T-45 Foam

[tarpon6]

This plane is underpowered with the stock 4000 kv motor. I have a bunch of 3s 2200 lipo's and would like to stick with those. Which motor / fan combination would you recommend for 3s lipos? I'd like to see an efficient performance boost without losing much flight time. I am considering a GWS 64mm 6 blade fan. I have a CC Phoenix 35 amp ESC that I could use to replace the stock esc.

[The Don]

I just had a person put the Wicked 4800 in on the stock fan it was about 330 watts if I recall. He posted it here on RCG I need to find his post!

Don

[tarpon6]

If I order the 4800, what do I need to use with the stock fan or possibly the GWS 64mm fan? Thank you!

[The Don]

You want to order it with the standoff adapter and EDO plug. That will fit the stock fan. Here is how to mount the motor:

http://www.rcgroups.com/forums/showpost.php?p=9992696&postcount=7

For the GWS EDF 64, you would order it with standoff adapter and no rotor plug. Just make sure the GWS EDF 64 you get is the new 3mm verison with the 3mm rotor adapter not the older 2.3mm version.

Don

[tarpon6]

Thanks Don, order submitted!