spastic
Jul 29, 2008, 08:36 PM
Back from "Unobtainium" status is the New improved Cap35 at valuehobby.com
I redesigned this bird from the ground up for popular 200+watt out-runners.
We worked very hard on this design, and it shows in the finish and construction. We were Relentless with the factory to produce the best possible results.
New features include:-Redesigned for common 200+watt out-runners
-Stronger Thicker Carbon Fiber fuselage reinforcement beams in the fuselage.
-Larger 3D tail surfaces.
-Stronger Useable hardware Included.
-Extra base color covering material included for making repairs (trans blue for bottom, solid white for top) keep it looking good!
-Thin wing provides super stable harrier upright and inverted, NO wing rock!
-Knife Edge is superb! high alpha Knife edge (HAKE) the best!
Materials used; select Balsa, Ply and Carbon Fiber, covering material is quality iron on. Wire hardware is hardened and useable no squashed landing gear here!
Wheels and ez-links also included, see pics.
Specs and required equipment:
Wing Span 35.5 inches (904mm)
Wing area 419 sq" (27.07dm^2)
Fuse length + rudder = 38.3 inches (973mm)
Weight ready to fly ~20oz (570g)
Wing load ~7oz/sq' (21g/dm^2) :cool:
Power: G-Force 450 (Emax2215)out-runner, or similar to a hacker 20-20L
Battery: 1300mAh-1600mAh Lipo, recommend 1300mAh 3s1p G-force 20C lipo.
ESC: 25amp ESC
Servos: 9-12gram servos, like: hs-55, hs56, hs-65hb (personal fav)
NOTE: At the moment there is no paper manual in the box. Check back on the website for an online manual soon.
Here are some pics!
Thanks
Gary "Spaz" Caruso
Designer, Valuehobby.com
I redesigned this bird from the ground up for popular 200+watt out-runners.
We worked very hard on this design, and it shows in the finish and construction. We were Relentless with the factory to produce the best possible results.
New features include:-Redesigned for common 200+watt out-runners
-Stronger Thicker Carbon Fiber fuselage reinforcement beams in the fuselage.
-Larger 3D tail surfaces.
-Stronger Useable hardware Included.
-Extra base color covering material included for making repairs (trans blue for bottom, solid white for top) keep it looking good!
-Thin wing provides super stable harrier upright and inverted, NO wing rock!
-Knife Edge is superb! high alpha Knife edge (HAKE) the best!
Materials used; select Balsa, Ply and Carbon Fiber, covering material is quality iron on. Wire hardware is hardened and useable no squashed landing gear here!
Wheels and ez-links also included, see pics.
Specs and required equipment:
Wing Span 35.5 inches (904mm)
Wing area 419 sq" (27.07dm^2)
Fuse length + rudder = 38.3 inches (973mm)
Weight ready to fly ~20oz (570g)
Wing load ~7oz/sq' (21g/dm^2) :cool:
Power: G-Force 450 (Emax2215)out-runner, or similar to a hacker 20-20L
Battery: 1300mAh-1600mAh Lipo, recommend 1300mAh 3s1p G-force 20C lipo.
ESC: 25amp ESC
Servos: 9-12gram servos, like: hs-55, hs56, hs-65hb (personal fav)
NOTE: At the moment there is no paper manual in the box. Check back on the website for an online manual soon.
Here are some pics!
Thanks
Gary "Spaz" Caruso
Designer, Valuehobby.com