Foam cutting CNC software

[foam_man]

Hi All
I have built a foam cutting CNC. I need the software that will controll the 4 stepper motors that move the XY tables in the correct direction. Does anyone know who makes this software?
Thanks

[exempt]

I thought for sure that I saw some type of CNC software in a Micromark catalog once but upon inspection of my latest catalog I don't see it, they do have a bunch of accesories for this though. I bet if you call them they may be able to point you in the right direction. www.micromark.com (http://www.micromark.com)
Sounds like a great project! I would love to do something like this someday.

Reagrds,
Scott

[Scott J]

Hey foam_man,
Bill Griggs Models carries cnc foam cutting software. http://www.griggsmodels.com/

Scott

[pfg]

get a copy of "Nuts and Volts" - its not carried at many places but has exactly what you need - even free software for the actual cutter control. e-mail me if you have trouble and we'll find a way to get you the info. http://www.nutsvolts.com/

[This message has been edited by pfg (edited 05-28-2001).]

[Far4nugn]

foam_man, did you ever finish this project? I'm about to start he same thing and would like to know if you found a solution for the software.

I plan to use a pair of (2channel) controllers from www.steppercontrol.com (http://www.steppercontrol.com) and some small steppers I have around my shop.

Thanks!

[jrgii]

I actually use a machine similar to what you guys are looking for, but it is a very expensive hardware and software solution for a hobbyist.I can cut foam up to 2" thick. I normaly work with polyethelene, polyurethane and a depron like material. Check out the link to see what it looks like.
http://www.data-technology.com/dt2200.html

[stealthy]

I purchased a copy from a guy in france, I have the link if your still looking for software. I think the price was around $30-$40, I'm about to build my cnc foam cutter this month along with a cnc router.

[wigham1]

Hi Foam_man

Would you consider telling us how you built the machine???

Thanks
Stephen

[This message has been edited by wigham1 (edited 09-07-2001).]

[Far4nugn]

jrgii, the laser cutting machine on that site is most impressive! wow.

Stealthy, please post a link to the SW site if its not too much trouble.

Thanks!

[philc]

I built this type of foam cutting machine quite a few years ago, and wrote software to run it. It is written in a C like language, if you want to take a look at it. It runs the motors in short, straight paths, which cut a nice smooth path on the machine. To make the whole system work you need a decent CAD program to develop the shapes to cut, a pre-processor(simple Basic program) to convert the shapes into steps/motor, and then the cutter hardware and software.

[Far4nugn]

philc, I'd like to try it if thats ok. I was considering doing the same, but I have very little programming experience and only in VB. I use 3D Studio Max to create the shapes, or I can scan a print and 'vectorize' it with other software.

Please email me a copy and maybe some advice on using it (if its not obvious) to: Scott@clausen.net

Thank a bunch!