Radio Setup

[agustin]

Some months ago I bought an ASW 27 but it does not have user manual.

I never flight a towed sailplane, usually i fly slope.

I need to know the initial radio setup..

This is the description of the plane:
This is a beautiful ASW27 RTF, just add your receiver. This KIT has been from Germany, with white composite Fuselage and wing-lets, sheeted foam wings, elevator and rudder, covered with oracover.
Glider has a nice aluminum Landing gear unit installed.
This Glider is professionel built up and covered, I would say it is a 9.9 out of 10.
The specs are:
wingspan: 159" without and 162" with wing-lets

fuse length: 70"

Servos:

Rudder set up with push-pull = JR NEH 531

Elevator = JR NEH 531

Elevator = JR NEH 531

Landing Gear = JR NEH 531

Tow Line system = JR NEH 531

6x Wing servos = each wing 3x Dymond 200 mini servo,

1x on aileron, 1x on flap and 1x on air brake and the servo

wires from each wing are put together in a central plug for

easy assembly.

Swith with charge unit (JR)

Batterie is a 2400 mAh NiCad

Steel Wing Tube ( Filled with let-balls for better weight )

Carbon Fiber servo covers 3x on ech wing

Wing, Elevator, Rudder, Wing-lets and Wing-tube cover and protection bags

The Glider has 2 test flights on and it fly's like a dream.

The speed range is working really perfect with the flaps,

to fly in thermel is very very impressive and also to fly aerobatics is absolutly perfect.

[marnochs]

About the same size as my 5m Ventus 2ax
Here's the control throws for it in the attached jpg
Ailerons are set at +15mm, -15mm initially then 50% ail differential is dialed into the radio program.