Dan Reynolds
Jan 25, 2003, 08:32 PM
RC10GT Factory Team non pull-start was tub chassis upgraded to new blue,
flat chassis. Two old truck bodies and an unpainted PT Cruiser body and
flame decals.
OS .12 CV engines with, non-pull start with Duratrax buttsink and MIP head
(also stock head included and complete set of gaskets). MIP stinger
exhaust. Engine has plenty of compression. Runs great. I've only used good
fuel in it. Was new when I got the truck and I've only ran it in the yard a
half-dozen times. Transmission is fresh rebuild - gears are in good shape.
Cresenzi brake system - works great.
RPM front and rear arms, ball bearing steering, front bumper, rear castor
blocks, rod ends, rear suspension tower, and shock clips - I'm sure I'm
missing some RPM parts. Lunsford Ti turnbuckles. Graphite front shock tower.
Rear tower is MIP for stinger pipe. Aluminum rear bumper, tranny brace,
antenna tube holder and side nerf bar / radio protector. HPI receiver case.
Heavy duty front steering servo - Cirrus CS-65 2BB Coreless, 102-121 oz.-in.
torque @ 0.16 transit time. Two sets of shock socks.
Set of chrome Clawz wheels with Pro-Line Masher 2000 MT tires / foams,
mounted and glued. They've never been on the ground under power. Also, set
of front / rear Pro-Line tires mounted on Associated wheels.
Futaba Magnum Jr. radio: transmitter and receiver with stock servos (1- used
for throttle / brake.
Glow starter, non-pull starter, fuel bottle. All kinds of spare parts, new
and used.
This has the best of everything. I didn't do everything aluminum so I would
have a truck light enough to race. Will include some tools. The truck is
not completely together but if you want it put together (like you don't want
to build it) I will put it together for you. I also have the Associated
manuals and books.
This is a sweet deal. You'll have plenty to drive with and plenty of parts
for tinkering as well (I was a tinkerer!).
I'm sure I'm missing some of the other great items. Please email with
questions and I'll send some photos if you want them. I do not have a great
camera so you'll get what you get. :-)
Reason for selling:
Lost Interest - Wanting small metal working lathe, e.g. Taig, Sherline or
Chinese / Harbor Freight types. I would entertain trades on that or high-end
astronomy gear.
flat chassis. Two old truck bodies and an unpainted PT Cruiser body and
flame decals.
OS .12 CV engines with, non-pull start with Duratrax buttsink and MIP head
(also stock head included and complete set of gaskets). MIP stinger
exhaust. Engine has plenty of compression. Runs great. I've only used good
fuel in it. Was new when I got the truck and I've only ran it in the yard a
half-dozen times. Transmission is fresh rebuild - gears are in good shape.
Cresenzi brake system - works great.
RPM front and rear arms, ball bearing steering, front bumper, rear castor
blocks, rod ends, rear suspension tower, and shock clips - I'm sure I'm
missing some RPM parts. Lunsford Ti turnbuckles. Graphite front shock tower.
Rear tower is MIP for stinger pipe. Aluminum rear bumper, tranny brace,
antenna tube holder and side nerf bar / radio protector. HPI receiver case.
Heavy duty front steering servo - Cirrus CS-65 2BB Coreless, 102-121 oz.-in.
torque @ 0.16 transit time. Two sets of shock socks.
Set of chrome Clawz wheels with Pro-Line Masher 2000 MT tires / foams,
mounted and glued. They've never been on the ground under power. Also, set
of front / rear Pro-Line tires mounted on Associated wheels.
Futaba Magnum Jr. radio: transmitter and receiver with stock servos (1- used
for throttle / brake.
Glow starter, non-pull starter, fuel bottle. All kinds of spare parts, new
and used.
This has the best of everything. I didn't do everything aluminum so I would
have a truck light enough to race. Will include some tools. The truck is
not completely together but if you want it put together (like you don't want
to build it) I will put it together for you. I also have the Associated
manuals and books.
This is a sweet deal. You'll have plenty to drive with and plenty of parts
for tinkering as well (I was a tinkerer!).
I'm sure I'm missing some of the other great items. Please email with
questions and I'll send some photos if you want them. I do not have a great
camera so you'll get what you get. :-)
Reason for selling:
Lost Interest - Wanting small metal working lathe, e.g. Taig, Sherline or
Chinese / Harbor Freight types. I would entertain trades on that or high-end
astronomy gear.