Pro Boat/ Or /arrow Shark Boats Are Like.

[sea hawk westoz]

Has Ennyone Got Or Seen These Arrow Shark Boats.
And Are Thay Enny Good. Have Mates Over Here Looking To Get One Of
There Larger Ones The 53 In Cat Hull. If Enny One Has Enny Recmendations
On Them.
Also What Ennyone Things About The Proboat Shockwave 55inch, Or The
Proboat Blackjack 55inch. Both Seem To Come Out With Zenoahs
260pum................


--
sea hawk westoz
------------------------------------------------------------------------
sea hawk westoz's Profile: http://www.modelpowerboat.com/forum/member.php?userid=2463
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[John]

I had one of the Arrowshark cats and I've seen a couple more down the
lake here. My advice is to steer clear of them.

The hulls are not straight and will perform like a dog. I put one of
my race engines in mine and it was uncontrollable. I got rid of it
real quick and bought an Insane cat.

Haven't seen any of the proboats so I can't comment.


--
John
------------------------------------------------------------------------
John's Profile: http://www.modelpowerboat.com/forum/member.php?userid=2
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[sea hawk westoz]

cheers .john so the hulls are rubish biult are thay . is the running
gear not good also as i see thay sell and make lots of hard ware. i was
looking at there twin tip mufler for across the transom internal with
twin pipes it looks good .

ive got a mate that thinks he want`s to get one . as he seys thay look
good ( it just goes to show looks can be desptive. so i gess thats why
there for sale for 900 compleat . ill tell him to say away from them.

the pro boat blackjack looks great and ive seen a proboat shockwave
55 and it looks ok and goes good. but then ive seen bade right ups and
good. it makes it hard to pick.

and ive seen some realy nice 60 inch cat hulls for sale in the states
but im finding it realy hard getting good shipping prices for them to
get them here
the hulls are $350 us . but the shipping is to high .


--
sea hawk westoz
------------------------------------------------------------------------
sea hawk westoz's Profile: http://www.modelpowerboat.com/forum/member.php?userid=2463
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[John]

There are options for good quality hulls in Australia. Unfortunately,
most are on the East Coast so you will get hit with shipping charges
too.


--
John
------------------------------------------------------------------------
John's Profile: http://www.modelpowerboat.com/forum/member.php?userid=2
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[Just for Fun]

Seahawk,
I also thought that the arrowshark boats looked good and bought their
21 sized RTR mono. Should be classified as almost RTR. Hate to say
looks were only packaging deep.Glass work was rubbish and shaft was
full of welding flux(still won't straighten after being out of the boat
six months) Tuned exhaust is a joke. All I can say is the hardware looks
reasonable but, as I've seen the rest of their work forget it; buy some
from a better known source. as for the multi exit exhaust is it wanted
for looks or function? As for Pro boat haven't seen one, won't comment.


--
Just for Fun
------------------------------------------------------------------------
Just for Fun's Profile: http://www.modelpowerboat.com/forum/member.php?userid=687
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[BCRandy]

FWIW, I looked at the Pro Boat and decided on an Aquacraft
Super Vee Brushless because of the quality of the hardware.
I've had it for several weeks and am happy with my choice.
The hardware and fit and finish are very good and the boat
is fast right out of the box.

Randy

<Just.for.Fun.3afjuf@no-mx.forums.yourdomain.com.au> wrote
in message
news:Just.for.Fun.3afjuf@no-mx.forums.yourdomain.com.au...
>
> Seahawk,
> I also thought that the arrowshark boats looked good and
> bought their
> 21 sized RTR mono. Should be classified as almost RTR.
> Hate to say
> looks were only packaging deep.Glass work was rubbish and
> shaft was
> full of welding flux(still won't straighten after being
> out of the boat
> six months) Tuned exhaust is a joke. All I can say is the
> hardware looks
> reasonable but, as I've seen the rest of their work forget
> it; buy some
> from a better known source. as for the multi exit exhaust
> is it wanted
> for looks or function? As for Pro boat haven't seen one,
> won't comment.
>
>
> --
> Just for Fun
> ------------------------------------------------------------------------
> Just for Fun's Profile:
> http://www.modelpowerboat.com/forum/member.php?userid=687
> View this thread:
> http://www.modelpowerboat.com/forum/showthread.php?t=642
>

[Jim]

Also check out the Mini boats at www.minicatracingusa.com Their Micro
Hydro is only 15" long but will give your Super Vee a run for it's money.
They are awesome!


"BCRandy" <RMAHEUXR@bellsouth.net> wrote in message
news:P%t1k.7382$8X4.6754@bignews5.bellsouth.net...
> FWIW, I looked at the Pro Boat and decided on an Aquacraft Super Vee
> Brushless because of the quality of the hardware. I've had it for several
> weeks and am happy with my choice. The hardware and fit and finish are
> very good and the boat is fast right out of the box.
>
> Randy
>
> <Just.for.Fun.3afjuf@no-mx.forums.yourdomain.com.au> wrote in message
> news:Just.for.Fun.3afjuf@no-mx.forums.yourdomain.com.au...
>>
>> Seahawk,
>> I also thought that the arrowshark boats looked good and bought their
>> 21 sized RTR mono. Should be classified as almost RTR. Hate to say
>> looks were only packaging deep.Glass work was rubbish and shaft was
>> full of welding flux(still won't straighten after being out of the boat
>> six months) Tuned exhaust is a joke. All I can say is the hardware looks
>> reasonable but, as I've seen the rest of their work forget it; buy some
>> from a better known source. as for the multi exit exhaust is it wanted
>> for looks or function? As for Pro boat haven't seen one, won't comment.
>>
>>
>> --
>> Just for Fun
>> ------------------------------------------------------------------------
>> Just for Fun's Profile:
>> http://www.modelpowerboat.com/forum/member.php?userid=687
>> View this thread:
>> http://www.modelpowerboat.com/forum/showthread.php?t=642
>>
>
>

[ereieoty]

just my two
centsbump-----------------------------------------------------------------our
wow power leveling and wow gold site:buy 'wow power leveling'
(http://www.powerlevelingweb.com),'wow power leveling'
(http://www.powerlevelingweb.com/wow-power-leveling-us.asp), cheap
'wow power leveling' (http://www.xowow.com),'wow power leveling'
(http://www.xowow.com/wow-powerleveling.asp),'Cheap WoW Gold'
(http://www.gamelee.com)-


--
ereieoty


------------------------------------------------------------------------
ereieoty's Profile: http://www.modelpowerboat.com/forum/member.php?userid=5085
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[Squidhead Racing]

Sea Hawk West Oz,

I have a brand new, no holes drilled Stryker F41 Cat with a Paris cowl
if you're interested?.

RRP for the hull here in Oz is $510 then approx $100-120 shipping from
the East Coast. (These are imported from RC Boat Works in the US)

I will let it go for $400 (and I'll even deliver it to you).

Only reason I am selling it is that I doubt I will get to it anytime
soon as I have too many other boats and builds I am working on (gas and
nitro outriggers).

Let me know if you're interested.

Johno


--
Squidhead Racing
------------------------------------------------------------------------
Squidhead Racing's Profile: http://www.modelpowerboat.com/forum/member.php?userid=4094
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[sea hawk westoz]

Squidhead Racing;1793 Wrote:
> Sea Hawk West Oz,
>
> I have a brand new, no holes drilled Stryker F41 Cat with a Paris cowl
> if you're interested?.
>
> RRP for the hull here in Oz is $510 then approx $100-120 shipping from
> the East Coast. (These are imported from RC Boat Works in the US)
>
> I will let it go for $400 (and I'll even deliver it to you).
>
> Only reason I am selling it is that I doubt I will get to it anytime
> soon as I have too many other boats and builds I am working on (gas and
> nitro outriggers).
>
> Let me know if you're interested.
>
> Johno

:cool: Hi there johno , mate ive got a hull already from the states
got it a cupple of weeks ago a costiom 50inch cat same as the the
expresscraft 58 thundercat.dont know what there like . im just fitting
it out now .thanks ennyways.
im gessing your leons mate . he told me the other week ya had a hull
avalable .
so when are you guys running your boat idd like to come see them go .
i hear from leon that he`s got his hydo going real good with his new
sikk mods he did.
cheers mark.


--
sea hawk westoz
------------------------------------------------------------------------
sea hawk westoz's Profile: http://www.modelpowerboat.com/forum/member.php?userid=2463
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642

[Huoliuhi]

bump!!haha


--
Huoliuhi


------------------------------------------------------------------------
Huoliuhi's Profile: http://www.modelpowerboat.com/forum/member.php?userid=5788
View this thread: http://www.modelpowerboat.com/forum/showthread.php?t=642