Flyboone
May 23, 2008, 12:34 PM
http://www.hobby-lobby.com/images/st418.jpg (http://www.hobby-lobby.com/rafale.htm)
ST418A Rafale Electric Ducted Fan RC Jet
25-3/8" wingspan, 38-3/4" long, 265 sq. in. wing area, 22-3/4 oz. flying weight. Highly detailed all molded EPS foam construction. Completely pre-painted with a beautiful camouflage paint scheme. Waterslide decals of the French Armee de L'air are pre-applied. The Ready-to-Fly (RTF) version comes complete with everything you need including a 72 MHz transmitter, 6-channel receiver, ducted fan unit, brushless motor, 25 Amp brushless speed controller, 1300 mAh 18C Lipo battery pack and Lipo balance charger. The Almost-Ready-to-Fly (ARF) version comes with everything listed above except the transmitter and 6-channel receiver. All electronics come pre-installed, no soldering required. The assembly takes about an hour; glue the wings, tail and nose to the fuselage with UHU Por (GR959). Glue the fixed main landing gear to the wings and screw the steerable nose wheel in position. After installing 8-AA batteries (not included) in the transmitter and charging the flight batteries, you are ready to fly. Canopy is held in place with pre-installed magnets and removes easily to provide access to the flight batteries. Controls are: Elevons (Aileron and Elevator mixed), Rudder/Nose Wheel steering, and Throttle.
For more information click HERE (http://www.hobby-lobby.com/rafale.htm)
Use this thread to discuss any and all things related to Rafale Electric Ducted Fan RC Jet
ST418A Rafale Electric Ducted Fan RC Jet
25-3/8" wingspan, 38-3/4" long, 265 sq. in. wing area, 22-3/4 oz. flying weight. Highly detailed all molded EPS foam construction. Completely pre-painted with a beautiful camouflage paint scheme. Waterslide decals of the French Armee de L'air are pre-applied. The Ready-to-Fly (RTF) version comes complete with everything you need including a 72 MHz transmitter, 6-channel receiver, ducted fan unit, brushless motor, 25 Amp brushless speed controller, 1300 mAh 18C Lipo battery pack and Lipo balance charger. The Almost-Ready-to-Fly (ARF) version comes with everything listed above except the transmitter and 6-channel receiver. All electronics come pre-installed, no soldering required. The assembly takes about an hour; glue the wings, tail and nose to the fuselage with UHU Por (GR959). Glue the fixed main landing gear to the wings and screw the steerable nose wheel in position. After installing 8-AA batteries (not included) in the transmitter and charging the flight batteries, you are ready to fly. Canopy is held in place with pre-installed magnets and removes easily to provide access to the flight batteries. Controls are: Elevons (Aileron and Elevator mixed), Rudder/Nose Wheel steering, and Throttle.
For more information click HERE (http://www.hobby-lobby.com/rafale.htm)
Use this thread to discuss any and all things related to Rafale Electric Ducted Fan RC Jet