This Is A Nice Balance Charger

[elemodelshop]

There are some GT POWER A6 on sale.
I think it's better than IMAX B6 .
It comes with the USB plug and has a nice price. :D

USD95 shipped,and paypal preferred :)

Desicription: G.T. POWER A6 BALANCE CHARGER/DISCHARGER

Operating voltage range: 10.0-18.0Volt

Circuit power: Max 50W for charging

Max 5W for discharging

Charge current range: 0.1-5.0A

Discharge current range: 0.1-1.0A

Current drain for balancing Li-Po: 300mAh/cell

NiCd/NiMH battery cell count: 1-15 cells

Li-ion/Polymer battery cell count: 1-6 series

Pb battery voltage: 2V,20V

Net weight: 400g

Dimensions: 165×130×45mm

For more infomations and pictures,please check THIS (http://www.elemodel.com/shopen/html/product_1477.html)

[elemodelshop]

There are some pictures showing the details of A6.

[elemodelshop]

Includes:

1× G.T. POWER A6 BALANCE CHARGER/DISCHARGER

1× temperature sensor

1× USB wire

1× different types of connectors

1× English manual

[Rascal_Tom]

i got one. its cool. you can adjust the final voltage level by pressing start+dec then powering up. thats pretty nice. it also comes with software, but i have yet to figure that out.

$79 isn't a bad price...just according to what shipping runs..

but yeah, i love mine. especially with all the connectors that come with it..

[bc-slowflyer]

Does it come with all the adapters for the different style balance plugs? (TP, PQ, KOK, Align, Apogee,etc?)

[JimNM]

What about the balance circuitt? Does it need to be fixed like the Imax B6? I would like to see some tests with batteries "balanced" by the new charger.

The Imax B5 works really well

The Imax B6 has balace circuitry problems...

[bobandris]

Am I correct in assuming that it does NOT have individual microprocessors for each cell in the pack?

Bob

[Rascal_Tom]

one test (http://www.rcgroups.com/forums/showthread.php?t=848179)

[mode1]

I have the Imax B-6. The balancer sucks. Hope this unit tests better.

[yaronk]

I see in the pictures connectors to car battery, what abot AC110?

[elemodelshop]

i got one. its cool. you can adjust the final voltage level by pressing start+dec then powering up. thats pretty nice. it also comes with software, but i have yet to figure that out.

$79 isn't a bad price...just according to what shipping runs..

but yeah, i love mine. especially with all the connectors that come with it..
●Features:

1,Microprocessor controlled
2,Delta-peak sensitivity
3,Individual cell balancing
4,Li-ion, LiPo and LiFe capable
5,Ni-Cd and NiMH capable
6,Large range of charge currents
7,Store function, allows safe storage current
8,Time limit function
9,Input voltage monitoring. (Protects car batteries at the field)
10,Data storage (Store up to 5 packs in memory)
11,Battery break in and cycling.

●Specification:

Input Voltage: 11~18v
Circuit power: Max Charge: 50W / Max Discharge: 5W
Charge Current Range: .1~5.0A
Discharge current range: .1~1.0A
Ni-MH/NiCd cells: 1~15
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~20v

[cmulder]

does this charger charges trough the balance port or does the discharge connecotr need to be connected?

[elemodelshop]

Does it come with all the adapters for the different style balance plugs? (TP, PQ, KOK, Align, Apogee,etc?)

It comes with Alligator Clips Cable,JST connector cable,Futaba connector cable
,glow plug heater charging cable,NOT INCLUDE A/C Adapter