culverdan
Apr 16, 2008, 10:58 PM
This has been a great boat for me tons of fun. I changed out the picco 67 and put in a picco 80 this engine is brand new never ran at all. I started putting the engine in and well got onto other projects so you still need to drill a couple mounting holes for the engine, also you need to put on the water lines for the engine.
This boat was very fast on the 67 but I wanted it to be even fast hint the picco 80. This boat is almost ready to run.
What does it come with, well as you know a brand new picco 80 two high tork futaba servos which are s 9304 i'm pretty sure they are coreless servos and i think they are putting out 80 oz speed on them i dont know. I use to use these in my pattern planes. Comes with a fairly new nmcid 5 cell you should be able to run on this battery pack all day long also has a on-off switch. Aeromarine running hardware. You will get a JR XS3 controller you need a RX for it. Also has the flex shaft and prop included like I said you will only need a rx for it
The boat is in good shape has a few chips here and there in the paint I did not paint the boat overall it looks really good just a few blemishs. The bottom of the boat the owner i got it from sanded it down so its just plain white with a little bit of glass showing. Does not seem to harm the way it runs it is pleanty fast. And will be faster with the 80 in it. If I had to guess I would say that this boat is doing 60mph perhaps a little less but I dont think so.
I guess I could take more pics of the boat if you asked me too. The boat is a dark metallic purple and bright yellow pretty much smokin Joes colors. It does not take on any water that Ive seen other the running in heavy chop and it handles chop very nice. This boat is 36" long beam im not sure would have to check it out or you can go too aeromarines web page and find it their.
Price is set at 400.00 plus shipping of 55.00
If you have any questions as to my no feedback and dont think you can trust me please contact my brother MOTOWNCALI on here or its MOTOWN you can also email him at MADMOC2@AOL.COM if you want I'll have him ship it for you. I do have feedback on ebay under Culverdan
This boat was very fast on the 67 but I wanted it to be even fast hint the picco 80. This boat is almost ready to run.
What does it come with, well as you know a brand new picco 80 two high tork futaba servos which are s 9304 i'm pretty sure they are coreless servos and i think they are putting out 80 oz speed on them i dont know. I use to use these in my pattern planes. Comes with a fairly new nmcid 5 cell you should be able to run on this battery pack all day long also has a on-off switch. Aeromarine running hardware. You will get a JR XS3 controller you need a RX for it. Also has the flex shaft and prop included like I said you will only need a rx for it
The boat is in good shape has a few chips here and there in the paint I did not paint the boat overall it looks really good just a few blemishs. The bottom of the boat the owner i got it from sanded it down so its just plain white with a little bit of glass showing. Does not seem to harm the way it runs it is pleanty fast. And will be faster with the 80 in it. If I had to guess I would say that this boat is doing 60mph perhaps a little less but I dont think so.
I guess I could take more pics of the boat if you asked me too. The boat is a dark metallic purple and bright yellow pretty much smokin Joes colors. It does not take on any water that Ive seen other the running in heavy chop and it handles chop very nice. This boat is 36" long beam im not sure would have to check it out or you can go too aeromarines web page and find it their.
Price is set at 400.00 plus shipping of 55.00
If you have any questions as to my no feedback and dont think you can trust me please contact my brother MOTOWNCALI on here or its MOTOWN you can also email him at MADMOC2@AOL.COM if you want I'll have him ship it for you. I do have feedback on ebay under Culverdan