Rcap 3

[mea06ra]

Hi Eladio,

I am new in to this group and i have already got the RCAP v 3 with the WPS with me..I was just going through the work you posted it online...I am a bit confused about the power...I have got an EM 406 reciever which plugs in to the RCAP 3 and in your post it says if the receiver works in 5v put jumber on or else take the jumber off and connect external power...My question is how do you supply power to the RCAP 3..Is it by external power or ?

[Ceros]

Mea06ra - attached is apicture from elswhere on the forum, to which I have added a blue arrow. The picture is taken from elswhere on the forum:

http://www.rcgroups.com/forums/attachment.php?attachmentid=747645

A similar setup is found on:

http://www.rcgroups.com/forums/showthread.php?p=7045942

I am NO expert and have no experiance with the RCAP at all, but with a regulator right next to this pair of wires, its a fair bet that this is where external power to the board can be fed in from. Still, you may wish to double check my reply with someone who has experiance.

[_helitron_]

Look here:

http://www.rcgroups.com/forums/showpost.php?p=9522708&postcount=256

It's a bit tricky to find :) !

Cheers,

//Erwin