Controller Compatibility

[tonyastro]

2 questions:

1. My wk-0701 is being read by FMS via mini-DIN to RCA into microphone however I can't get the right axes on PPJoy. Like the throttle is controlling the roll or the rudder is controlling the elevation. Can anyone give me their exact settings for the channels and axes on PPjoy and FMS?
2. What other flight sims are compatible with the Walkera wk-0701 controller? Is Heli-x compatible?

Thanks

[Malc C]

maybe this thread will help

http://www.rcgroups.com/forums/showthread.php?t=596728

I also found this which might answer your question !


settings for walkera 52 with pcm wk-0701 radio at radio dips 1,2 and 4 on turn the rest of

settings for smartpropoplus console walkera(pcm) , check auto detect shift polarity, check enable audio input, microphone, filter check ccpm:

settings for FMS 2.0 alpha 8.3 use 4,2,1.3,4,1,2,6 and check the inv for throttle,tail,roll and pitch

It's really amaizing... entered "WK0701" into google and all this info was found in the first three hits.... :rolleyes: :D

[tonyastro]

maybe this thread will help

http://www.rcgroups.com/forums/showthread.php?t=596728

I also found this which might answer your question !



It's really amaizing... entered "WK0701" into google and all this info was found in the first three hits.... :rolleyes: :D

Nice! Thanks. Why didn't I see that when I googled..

[Danny Troy]

Just yesterday I resurrected my old Aerochopper controller for use with FMS, on my desktop computer. In a FMS forum I was advised to use, from the top box down, 7, 6, 5 & 8. Leaving the bottom four boxes blank. That didn't work at all. I had no control whatsoever. I checked the settings on my laptop and I knew FMS with my controller had worked the last time I tried it on this laptop.
The numbers on that were 5, 4, 3, 6. This time I had some control, but it still wasn't right. I played around a little more and wound up with 3, 2, 1, 4. Now all is well.

So basically, I think you need to play around with it until you hit on the right combination.

[tonyastro]

I played around and after a hours of reinstalling, resetting and tweaking axes, I finally got it to work. I'll post my settings when I get home from work. So, anyone know if other sims work with Walkera wk-0701 like Heli-x. I know I should've tried it but had no time yesterday.