Joe Bennett
Mar 08, 2008, 03:30 PM
I custom built this Pan & Tilt mount to use with my MastCAM system. It was designed to work with a full sized DSLR (using the yellow adaptor plate to keep things balanced properly), or a smaller point and shoot camera. Plenty of room on board for accessories, video framing camera and Xmitter, and many other potential needs. It has a tilt servo installed, as well as a modified pan servo that allows for 360 degree turning. These servos are heavy duty BB types. There is also an on/off switch, and a receiver battery pack on board. This system was designed for heavy duty use, and both the pan & tilt are strong and precise. I will also include the extra parts I have on hand for the two gears and drive chain for the pan assembly. The base mounting is made to fit the top section of a Wonderpole fiberglass push up mast, and when using the 40' version, will reliably extend to approximately 34' without the need of guy wires. I do have a cart and Wonderpole available as well, but shipping would have to be figured for those items. PM if interested in these. There is no receiver on board, but location is ready to accept any type of receiver you might wish to use. Lots of design work and construction effort went into this system, and it is truly one of a kind. Asking price is $200 shipped to any USA address. PayPal is preferred. PM with any questions or for payment information.