All Star biplane by ace r/c

[Ketsueki]

this is an old dusty kid my step dad pulled out of the closet, and was curious what it might take to turn it into an electric flier, and what kind of power system would work with this plane

it has 400sq inches of wing area the plane has a max weight of 26 ounces

they recommend that the plane be powered with a .10-.15 gas engine it has fully symmetrical wings and the box has it labeled as a 'sport aerobatic' plane

any information would be great, thanks guys

[Thayer]

Not sure what to recommend for power, but do not overload it. This is a great little flyer. I have an old OS 15 in mine, and it is really more than it needs. Sorry I can't weigh it for you as it is a few hundred miles from me right now. How much power all depends on your flying style, but if I were to convert mine, I would look for a power system with about 150-175 watts or so.

Thayer

[Ketsueki]

i was thinking 4 9 gram servos (2 for alerions) and a brushless, but i have no idea what to buy for a battery but im thinking ill probably run it at 3s

[big-john-52]

you might try this motor. I have this on a .20 size plane and it has lots of power .
himax motors work well and they stand by there products. all though this may be a little much if so the a himax 2812 or 2816.


HC35 Outrunner
250-450 Watts



• Wide application ranges - 9 motors in 4 frame sizes,
• Heavy duty motor mount, prop adapter & connectors included,
• Advanced designs - dual ball bearing & powerful magnet,
• Replaces Axi-28 series motors.




HC3510 -This 250 watt motor is for midsize models weighing 24-32 oz for 3-D flight, up to 40 oz for aerobatic flight and up to 50 oz for leisure flight.

• For two-cell LiPo applications - use HC3510-1540
• For three-cell LiPo applications - use HC3510-1100
• Gas equivalent - .15


Part No. Dia mm Length mm Weight g Shaft Dia Prop Size* ESC Rating Kv Rm Io Sale
HC3510-1100
Learn more
35.2 32.2 89 4mm 10x5-12x6 25 1100 .055 1.2
$63.99

HC3510-1540
Learn more 35.2 32.2 89 4mm 8x4-10x5 35 1540 .029 1.8
$63.99

[pda4you]

Many fond memories - mine was a great flyer but a stinker on the ground.....

:)

Mike

[Ketsueki]

good to hear all the good replies! i cant afford a himax setup, i was most likely going to order my motor and esc from hobby city, however ill keep your watt recommendations in mind! I'm glad to hear its a good flier, any one have any tips they might give me for the build? im really looking forward to flying this plane!

[pda4you]

I'm glad to hear its a good flier, any one have any tips they might give me for the build? im really looking forward to flying this plane!

Good flyer - by yesterdays standards. This airplane is heavy - and will require a bit more speed than the super light laser cut models of today.....

:)

Mike