lets see some corsairs

[wingedwonder]

ive just bought a great planes corsair that was built by someone who deffinatly had a talented hand at building. i wish i could take the credit fir this one but i cant. im in the process of putting a motor and radio equipment in it now, cant wait to fly this one. hopefully everybody will post a pic of there corsair no matter what size. thanks for looking kraig,

[phyxer]

That is a very nice looking model! I would certainly be very proud to pull that out of the back of my truck and fly it! Maybe someday I assume that it will be fuel powered since it is in the fueled warbirds section????? If it were mine it would definitely be electric powered! :p

Troy

[mboland]

This is my effort at a Corsair. The kit was partially framed and given to me at our flying field as the most likely to finish it after it was left sitting under some ones house for a couple of years. :p
RCV 120SP up front, Robart 615 retracts. All up weight came to 6kg but she flies very well and the flaps are a dream to use.
I had a lot of reliability and vibration problems with the 120SP so she now sports a 90 2 stroke.

[rwright142]

Are 1/2 build, display models OK too? ;)
1/8 Scale F4U Corsair Display Model (http://www.putfile.com/rwright142)

http://feat.putfile.com/profilepics/main/5/rwright142-42306084709.jpg

http://img2.putfile.com/thumb/11/30609134420.jpg

http://img2.putfile.com/thumb/11/30609134488.jpg

http://img2.putfile.com/thumb/11/30609134523.jpg

http://img2.putfile.com/thumb/11/30609134360.jpg

http://img2.putfile.com/thumb/11/30609134459.jpg

[Lt.Smash]

Not sure how I find this thread, but Mustangs and Corsairs are my favorite scale RC planes. Looking for a good Cosair kit, Im guessing a 60size. Im 100% eletric now, but slowing converting the gas guys at the fields to electrics, now its their turn to convert me from eletric to Glow :)

Super Looking planes guys/gals!

[Twinwarbirdflier]

do partially built Corsairs count? Top Flite Giant scale, roughly one half done. Build thread on RCG.....

[FTIR]

My fun flyer with brushless upgrade...

FTIR

[wagnerg]

Here is mine undergoing a static thrust test.

George

[dr MadMan]

Mine too :p
scratch built by my own plans, powered .40 MWWS

wingspan 1200mm (~50˝, I guess :o ) and about 1800 grams weight, and goes like hell
Now is no more in my hands

[dr MadMan]

:) mad vid. :D

http://www.youtube.com/watch?v=-uORu8QubSc

[bobf]

What are you using to measure the thrust?

Here is mine undergoing a static thrust test.

George

[twinster2]

Here is my Great Planes Corsair and AT6 that I built seval years ago. They are both powered by a OS 52 four strokes. By the way, this four stroke is the perfect engine for the 40 size war birds. The mustang is a a Midwest 60 that I no longer own.

[wingedwonder]

sweet there are some really nice corsairs on here. im in the process of putting to gether a combat corsair by great planes i will post as soon as i get it ready.

[wagnerg]

What are you using to measure the thrust?

This is what is circled in red in the previous picture:

http://store.pasco.com/pascostore/showdetl.cfm?&DID=9&Product_ID=1506&Detail=1

It's one on the sensors is a setup for a high school Physics lab station.

George

[Bill Covert]

Do Hellcats count too? :D

[SMRTIC]

Here's my GWS. I was getting little tired of doing military schemes, so I went for an old air racer.

[Pilot44]

I did this one some years ago.

Jim

[Skaweee]

Pilot44, that's a fine looking corsair. Is that the Gold Edition kit?