bdholsin
Jan 23, 2008, 04:46 PM
Aquacraft V24 one-design, Futaba 3PK transmitter, and Duratrax Warhead.
I’m going to focus more on planes and step back from trucks and boats.
V24 Upgrades:
1. I removed the outdrive and installed a jet drive on the boat in an effort to generate more speed. I have yet to try this combination so I’m not certain if it was a huge success.
2. The servos have been upgraded to HRS.
3. The reverse mechanism is included but never installed on the jet drive.
4. I installed a 6V battery for the HRS servos and Futaba “J” type connector for ease of charging. If you so desire you can also plug a charger (included) directly into the battery pack.
5. The wooden stand, manual for the boat and manual for the jet drive are included.
6. This will be shipped in the original box.
Warhead:
1. The Warhead is in good condition. I always use after-run oil when done.
2. I removed the Phillips head screws that hold the suspension and installed hex-head screws. This makes adjusting the suspension MUCH easier.
3. Removed the pull start and installed a shaft starter. I’ll include the correct hex-head shaft starter that you can put in a drill motor or kwik-pit hand starter.
4. The standard AA battery module has been removed and a 5-cell rechargeable battery pack installed. The charger pigtail is easily accessable now for easier charging.
5. The manual & CD for the Warhead is included. I’ll also throw in my Duratrax failsafe and any additional parts (such as screws, filter oil and glow ignitor) that I have as I won’t need them.
6. This will be shipped in the original box.
The Futaba 3PK transmitter has a CAMPAC module installed for almost unlimited model memory. The manual is also included. I don’t have the original box.
$1,000 (I'll cover shipping to the U.S.)
I’m selling this as a whole lot as the Futaba 3PK transmitter is set up for both and I don’t have time to run either of them with three kids in the house and other hobbies going.
I’m going to focus more on planes and step back from trucks and boats.
V24 Upgrades:
1. I removed the outdrive and installed a jet drive on the boat in an effort to generate more speed. I have yet to try this combination so I’m not certain if it was a huge success.
2. The servos have been upgraded to HRS.
3. The reverse mechanism is included but never installed on the jet drive.
4. I installed a 6V battery for the HRS servos and Futaba “J” type connector for ease of charging. If you so desire you can also plug a charger (included) directly into the battery pack.
5. The wooden stand, manual for the boat and manual for the jet drive are included.
6. This will be shipped in the original box.
Warhead:
1. The Warhead is in good condition. I always use after-run oil when done.
2. I removed the Phillips head screws that hold the suspension and installed hex-head screws. This makes adjusting the suspension MUCH easier.
3. Removed the pull start and installed a shaft starter. I’ll include the correct hex-head shaft starter that you can put in a drill motor or kwik-pit hand starter.
4. The standard AA battery module has been removed and a 5-cell rechargeable battery pack installed. The charger pigtail is easily accessable now for easier charging.
5. The manual & CD for the Warhead is included. I’ll also throw in my Duratrax failsafe and any additional parts (such as screws, filter oil and glow ignitor) that I have as I won’t need them.
6. This will be shipped in the original box.
The Futaba 3PK transmitter has a CAMPAC module installed for almost unlimited model memory. The manual is also included. I don’t have the original box.
$1,000 (I'll cover shipping to the U.S.)
I’m selling this as a whole lot as the Futaba 3PK transmitter is set up for both and I don’t have time to run either of them with three kids in the house and other hobbies going.