Trinity Sirio .12 on a HPI SS? What Header?

[EJ]

Ok here is my problem before I order this motor I wanted to see if anyone
has a rear exhaust motor on a SS or a RTR3. Since HPI put the exhaust on the
passenger side of the car its been a little difficult for me to find a
header that will work. Is this what I need?
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXTB62&P=K Please don't
answer unless your sure. Has anyone ever seen a picture of a SS or RTR3 with
the tuned pipe exiting the rear instead of the side? Please pass along any
pics or links THANKS!!!

[Jay A]

There are quite a few pictures of these cars on the rccaraction.com message
boards. Here's one of them, scroll down:

http://www.radiocontrolzone.com/forums/showthread.php?s=0ced780c3c3484597548
497eb623e7cc&threadid=74330&perpage=25&highlight=rs4%20ss&pagenumber=7

If you get the right header you should clear the rear tire with comfortably.
As to the which header it would be good for you to bring the car to the
hobby shop so you can at least gauge the size you need.

Jay
"EJ" <Merlin19771@charter.net> wrote in message
news:v07ualrvvqvm92@corp.supernews.com...
> Ok here is my problem before I order this motor I wanted to see if anyone
> has a rear exhaust motor on a SS or a RTR3. Since HPI put the exhaust on
the
> passenger side of the car its been a little difficult for me to find a
> header that will work. Is this what I need?
> http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXTB62&P=K Please don't
> answer unless your sure. Has anyone ever seen a picture of a SS or RTR3
with
> the tuned pipe exiting the rear instead of the side? Please pass along any
> pics or links THANKS!!!
>
>