reef racer/zig zag racer hull + motor and shaft

[ihor14448]

hi, i was wondering if anybody had a zig zag racer or reef racer hull with motor and shaft prefered, i'm going to use my own ESC and rx.

LMK what you have, any similar simple cheap boat hull will be condidered too,

thanks

[slsurfer]

Why dont you just buy a new reef racer? They are only $70 And you can go to your local hobby shop to get anything else. I would though recomend buying 3oz weights and a 19 turn/ brushless motor. I have both a zig zag racer and reef, so let me know what your plans are!

[Lee R. Wheeler]

Hi! Here it is. http://www.recycler.com/toys/detail.classified?id=RCY-196-12629084&search_zip=&class=5940 I found this today.



Good Luck.

[ihor14448]

yea how much is the shipping though, ill see

[csr101]

I have Zig zag that I gutted and replaced all the hardware with aftermarket stuff to make it reliable. The cover was also made water tight and use friendly.

Shoot me a e-mail and I'll fire up some photos.

williams101r@hotmail.com

[ihor14448]

i have a deal going on on a ZZR2 for like 30$, ill tell you if it goes through

[ihor14448]

Why dont you just buy a new reef racer? They are only $70 And you can go to your local hobby shop to get anything else. I would though recomend buying 3oz weights and a 19 turn/ brushless motor. I have both a zig zag racer and reef, so let me know what your plans are!

you willing to sell yours?