PDA

View Full Version : XTM R-Box Reverse Mixer?


C. Cat
Dec 10, 2002, 12:47 PM
XTM R-Box Reverse Mixer http://www.hobbypeople.net/gallery/146076.asp

Does anybody how this thing works? I can't find many details aside
from a few sentances.

On my T-Maxx, I got tired of restarting using the plug-in starter
switch/batt, so I put a 900 mAh battery onboard and two micro switches
so that with the trans in reverse I can put on full brake and this
fires up the starter. Works great!, but then this thing comes along,
so I'm wondering exactly how it works so I can posibly dedicate the
3rd controller channel (forward/reverse) to the starter.

--Cheshire

Paradox
Dec 10, 2002, 05:10 PM
"C. Cat" <cheshire_omit_cat@covad.net> wrote in message
news:nm9cvuca5e6gmki5cv7iukdrchaftu8hm0@4ax.com...
>
> XTM R-Box Reverse Mixer http://www.hobbypeople.net/gallery/146076.asp
>
> Does anybody how this thing works? I can't find many details aside
> from a few sentances.
>
> On my T-Maxx, I got tired of restarting using the plug-in starter
> switch/batt, so I put a 900 mAh battery onboard and two micro switches
> so that with the trans in reverse I can put on full brake and this
> fires up the starter. Works great!, but then this thing comes along,
> so I'm wondering exactly how it works so I can posibly dedicate the
> 3rd controller channel (forward/reverse) to the starter.
>
> --Cheshire
>

I'm assuming that it controls 2 servos, by the actions of one, so with your
throttle if you push it ALL The way back, it'll set the car into reverse,
otherwise it'll brake?