Re: R/C lighting

[TempestNightmare]

Go to www.rcxotic.com
I wrote and article ther about light kits, and one about how to install them
hidden.

Jon

"Alec" <smartalec87@mindspring.com> wrote in message
news:asebb1$b0n$1@slb4.atl.mindspring.net...
> how do i mount the LED on the inside of the body
> "NOTGIVEN" <@.com> wrote in message
> news:gTpG9.65$rv5.42842@news20.bellglobal.com...
> > "SimonJ" <Me@Mine.net> wrote in message
> > news:ascous$njq$1@helle.btinternet.com...
> > >
> > > "Alec" <smartalec87@mindspring.com> wrote in message
> > > news:ascft4$38g$1@slb6.atl.mindspring.net...
> > > > i want to make a set of L.E.D head lights for my car but where can
you
> > > mount
> > > > them because if it was on the outside of the body it would get
> smashed.
> > > >
> > > >
> > > Try on the inside of the body then.
> > >
> > > Anyway, you will find it vey hard to smash the LED's.
> >
> > ditto oh that led's are very durable
> >
> >
>
>

[TOMMY]

>how do i mount the LED on the inside of the body

If you can find a cheap set of Tamiya rollbars with the fake light bar. Take
the back half of the KC light. It has a single screw hole below (drill a second
to prevent spinning) this allows it to be mounted inside the body, and a center
screw hole that you can feed the led light through. I ran this set up without
breaking for a long time.

Tommy

[Sebastian]

Here are two LED lighting HOWTOs from Stampede owners, showing a couple
different techniques:

http://www.inadad.com/rc/led.shtml

http://www.fdc.arizona.edu/drennen/stampede/lighting.htm

--
Freedom begins between the ears. -Ed Abbey