Where to buy ADIS16355 ?

[wadiprawita]

Dear All,

Any idea where we can buy ADIS16355 ?

Regards

-doni-

[FAKHREALAM]

Here is the link to the ADIS16355 info but seems to me, its not available from ADI, only data sheet and other app notes are available. I will check with ADI sales and let you know. How many are you looking for.

http://www.analog.com/en/prod/0,2877,ADIS16355,00.html

[wadiprawita]

About 1 or 2, I think, depends on the price :)
I wonder if ADI sales can also help about the samtec connector.

Regards

-doni-

[wadiprawita]

Well,

I openned the above links, and find this :

"This product is not yet released to manufacturing. Please contact the MCP Group for additional information."

So is it still prototype ? No a proven product yet ? Anybody has experience with this product ?

Regards

-doni-

[FAKHREALAM]

About 1 or 2, I think, depends on the price :)
I wonder if ADI sales can also help about the samtec connector.

Regards

-doni-

I just emailed ADI, waiting for the reply, What my estimate is, the unit price is around US$300/-. I checked it with ADI app engineer in MAY 2007.

[FAKHREALAM]

About 1 or 2, I think, depends on the price :)
I wonder if ADI sales can also help about the samtec connector.

Regards

-doni-

This product is not yet released to manufacturing. Please contact the MCP Group for additional information. FREE signal chain workshops presented by Avnet and ADI.

Note: Please contact ADI at this email address 'ADIS.samples@analog.com', if you need more information.

Try ADIS16350, its kind of same

Tri-axis gyroscope with digital range scaling
±75, ±150, ±300°/s settings
14-bit resolution
Tri-axis accelerometer
±10 g measurement range
14-bit resolution

The ADIS16350 is in development, but ADI do have a pre-release sampling program.

Part only: $450, ADIS16350AMLZX
Part with simple interface board: $475, ADIS16350/PCBZ
Full evaluation kit, $575, ADIS16350/EVAL

Fakhre Alam

[wadiprawita]

Fakhre Alam,

Thank You for Your kind assistance, but I think ADIS16355 is musch better than ADIS16355. If I see the datasheet, the ADIS16355 is already compensated for temperature change and misalignment (especially for misalignment, we need rate table to do that kind of calibration). In the datasheet we can see the stability over temperature of the ADIS16355 is very nice.

Mybe I will just have to wait.

Thank's

-doni-

[FAKHREALAM]

-doni-

Here is the info you needed, please contact Looney, Mark Mark.Looney@analog.com], he is the app engineer at ADI sensor group. Give him a call or email, he will arrange sample for you.

Mark Looney
iSensor Application Engineer
Analog Devices, Inc.
(336) 605-4139
www.analog.com/isensor

The 1000pc pricing for the ADIS16355AMLZ is $359. As volumes scale up, there are additional opportunities to optimize the cost structure.

ADIS16355AMLZ $585

ADIS16355/PCBZ $599

ADIS16355/EVALZ $699

Thanks.
Fakhre Alam

[wadiprawita]

Dear Fakhre Alam,

Thank's for Your kind Asistance !!

Regards

-doni-

[wadiprawita]

Dear Fakhre Alam,

I have contacted them, they sill have to manufacture it, so I have to wait until mid-February.

Regards

-doni-

[FredFl]

So finally, did you manage buying it at a good price?
The only price I could find is 592USD from Digikey or Analog, which is much more expensive than the 363USD it costs when ordering 100pcs.

[wadiprawita]

Yes, I bought this around 6 months ago, from digikey. The demo board with parallel port interface. Now AD provides the USB version. And yes, the price was quite expensive too

-doni-

[Tuner]

I purchased an ADIS16354 it is calibrated for a more narrow temp range, still very adequate and cheaper.
I got this a few weeks ago directly from analog. the price was not $363 unless of course you plan to buy more 1. It was less than digikey but not by much.
You can see the price if you add it to a shopping cart and proceed to checkout on the analog devices site.
Calling Analog Devices ended up wasting my time FYI.

I may not need this and might be willing to sell it and take a good $100 or so off the top if anyone is interested.

Scott

[mikel]

I'd buy an ADIS16354 for $363, but they want about $500 for it when you buy a single unit. I also contacted Analog Devices support, but it didn't do any good :)

Scott,
Do you want to sell yours? Is it just the module with flex cable or development board with 2mm pitch connector?

[BluSkyRidr]

I might be interested in buying it also. Is it the eval kit?

Andy