FS: COMPLETE 30 size HELICOPTER

[Decoding.INFO]

KYOSHO CONCEPT 30 SR-T : SC.32H Mk.II Engine, Kyosho 1 Piece Muffler, CSM
180 Gyro, JR R700 7Ch PPM Receiver, 5 x JR517 Servos, Nicad, Zeal Hex
Adaptor, NHP Carbon Tail Drive, Quick Boom, LOTS AND LOTS of Spares there is
almost enough to built another complete heli!, Good Condition (the gyro and
Receiver and new and have only been flown 3 times!!! This heli is complete
all you will need is a TX and starting gear and she's up up and away...

also here is a list of spairs might some parts that i havent listed also

have pic i can e-mail if required

DO THE USUAL TO THE e-Mail Address and youll get through to me .....


a.. Front and Rear main frame inc. aileron linkages
a.. NHP Carbon tail drive
a.. Cooling Ducting left and right side
a.. Fuel Tank
a.. Complete mast inc. Swash Plate
a.. Swash Plate
a.. Stock head Inc. Flybars, Paddles, Blade Holders etc
a.. 2 sets of main drive gears
a.. Tail Gearbox all gears
a.. 2 Gearbox Housings Tail Blade Grips Etc.
a.. Starter Cone
a.. Cooling Fan
a.. Engine Mount
a.. Clutch
a.. Clutch Bell Housing
a.. Various Pushrods, Ball Joints, Bell Cranks etc.
a.. There are enough spares here to cope with just about any failure.

might be more that i havent listed also lol

[Beav]

"Decoding.INFO"
<sales@r-e-m-o-v-e-s-p-a-m-p-r-o-t-e-c-t-i-o-n-decoding.info> wrote in
message news:0pwJ9.138$hT4.88155@newsfep1-win.server.ntli.net...
> KYOSHO CONCEPT 30 SR-T : SC.32H Mk.II Engine, Kyosho 1 Piece Muffler, CSM
> 180 Gyro, JR R700 7Ch PPM Receiver, 5 x JR517 Servos, Nicad, Zeal Hex
> Adaptor, NHP Carbon Tail Drive, Quick Boom, LOTS AND LOTS of Spares there
is
> almost enough to built another complete heli!, Good Condition (the gyro
and
> Receiver and new and have only been flown 3 times!!! This heli is complete
> all you will need is a TX and starting gear and she's up up and away...

Any idea what sort of price?


--
Beav


Please note my E-mail address is "beavis dot original at ntlworld dot com"
(with the obvious changes)

Beavisland now lives at
www.beavisoriginal.co.uk

[Decoding.INFO]

Hi yer sorry forgot to put the price in lol in the region of £300

forgot to say i also have the original manul and printed version also which
is included.

"Beav" <beavis.original@ntloxoworld.com> wrote in message
news:XTDJ9.75765$tZ6.819922@news.easynews.com...
>
> "Decoding.INFO"
> <sales@r-e-m-o-v-e-s-p-a-m-p-r-o-t-e-c-t-i-o-n-decoding.info> wrote in
> message news:0pwJ9.138$hT4.88155@newsfep1-win.server.ntli.net...
> > KYOSHO CONCEPT 30 SR-T : SC.32H Mk.II Engine, Kyosho 1 Piece Muffler,
CSM
> > 180 Gyro, JR R700 7Ch PPM Receiver, 5 x JR517 Servos, Nicad, Zeal Hex
> > Adaptor, NHP Carbon Tail Drive, Quick Boom, LOTS AND LOTS of Spares
there
> is
> > almost enough to built another complete heli!, Good Condition (the gyro
> and
> > Receiver and new and have only been flown 3 times!!! This heli is
complete
> > all you will need is a TX and starting gear and she's up up and away...
>
> Any idea what sort of price?
>
>
> --
> Beav
>
>
> Please note my E-mail address is "beavis dot original at ntlworld dot com"
> (with the obvious changes)
>
> Beavisland now lives at
> www.beavisoriginal.co.uk
>
>

[Decoding.INFO]

Forgot to put the price in looking in the region of £300 and also comes with
the original manual and a printed manual also

[John Banks]

2p

"Decoding.INFO"
<sales@r-e-m-o-v-e-s-p-a-m-p-r-o-t-e-c-t-i-o-n-decoding.info> wrote in
message news:0pwJ9.138$hT4.88155@newsfep1-win.server.ntli.net...
> KYOSHO CONCEPT 30 SR-T : SC.32H Mk.II Engine, Kyosho 1 Piece Muffler, CSM
> 180 Gyro, JR R700 7Ch PPM Receiver, 5 x JR517 Servos, Nicad, Zeal Hex
> Adaptor, NHP Carbon Tail Drive, Quick Boom, LOTS AND LOTS of Spares there
is
> almost enough to built another complete heli!, Good Condition (the gyro
and
> Receiver and new and have only been flown 3 times!!! This heli is complete
> all you will need is a TX and starting gear and she's up up and away...
>
> also here is a list of spairs might some parts that i havent listed also
>
> have pic i can e-mail if required
>
> DO THE USUAL TO THE e-Mail Address and youll get through to me .....
>
>
> a.. Front and Rear main frame inc. aileron linkages
> a.. NHP Carbon tail drive
> a.. Cooling Ducting left and right side
> a.. Fuel Tank
> a.. Complete mast inc. Swash Plate
> a.. Swash Plate
> a.. Stock head Inc. Flybars, Paddles, Blade Holders etc
> a.. 2 sets of main drive gears
> a.. Tail Gearbox all gears
> a.. 2 Gearbox Housings Tail Blade Grips Etc.
> a.. Starter Cone
> a.. Cooling Fan
> a.. Engine Mount
> a.. Clutch
> a.. Clutch Bell Housing
> a.. Various Pushrods, Ball Joints, Bell Cranks etc.
> a.. There are enough spares here to cope with just about any failure.
>
> might be more that i havent listed also lol
>
>
>
>

[David Smith]

You're not tricking me into THAT again!
--
Dave S, Kuusankoski, Finland.

My return address requires modification before use.
http://personal.inet.fi/koti/david.smith/helicopters/

"John Banks" <zoomerman@blueyonder.co.uk> wrote in message
news:8SLJ9.60350$o.27898@news-binary.blueyonder.co.uk...
> 2p
>
> "Decoding.INFO"
> <sales@r-e-m-o-v-e-s-p-a-m-p-r-o-t-e-c-t-i-o-n-decoding.info> wrote in
> message news:0pwJ9.138$hT4.88155@newsfep1-win.server.ntli.net...
> > KYOSHO CONCEPT 30 SR-T : SC.32H Mk.II Engine, Kyosho 1 Piece Muffler,
CSM
> > 180 Gyro, JR R700 7Ch PPM Receiver, 5 x JR517 Servos, Nicad, Zeal Hex
> > Adaptor, NHP Carbon Tail Drive, Quick Boom, LOTS AND LOTS of Spares
there
> is
> > almost enough to built another complete heli!, Good Condition (the gyro
> and
> > Receiver and new and have only been flown 3 times!!! This heli is
complete
> > all you will need is a TX and starting gear and she's up up and away...
> >
> > also here is a list of spairs might some parts that i havent listed also
> >
> > have pic i can e-mail if required
> >
> > DO THE USUAL TO THE e-Mail Address and youll get through to me .....
> >
> >
> > a.. Front and Rear main frame inc. aileron linkages
> > a.. NHP Carbon tail drive
> > a.. Cooling Ducting left and right side
> > a.. Fuel Tank
> > a.. Complete mast inc. Swash Plate
> > a.. Swash Plate
> > a.. Stock head Inc. Flybars, Paddles, Blade Holders etc
> > a.. 2 sets of main drive gears
> > a.. Tail Gearbox all gears
> > a.. 2 Gearbox Housings Tail Blade Grips Etc.
> > a.. Starter Cone
> > a.. Cooling Fan
> > a.. Engine Mount
> > a.. Clutch
> > a.. Clutch Bell Housing
> > a.. Various Pushrods, Ball Joints, Bell Cranks etc.
> > a.. There are enough spares here to cope with just about any failure.
> >
> > might be more that i havent listed also lol
> >
> >
> >
> >
>
>

[John Banks]

LOL {:o]

"David Smith" <david.smith@no_spam_pp2.inet.fi> wrote in message
news:pgNJ9.511$j44.432@read3.inet.fi...
>
> You're not tricking me into THAT again!
> --
> Dave S, Kuusankoski, Finland.
>
> My return address requires modification before use.
> http://personal.inet.fi/koti/david.smith/helicopters/
>
> "John Banks" <zoomerman@blueyonder.co.uk> wrote in message
> news:8SLJ9.60350$o.27898@news-binary.blueyonder.co.uk...
> > 2p
> >
> > "Decoding.INFO"
> > <sales@r-e-m-o-v-e-s-p-a-m-p-r-o-t-e-c-t-i-o-n-decoding.info> wrote in
> > message news:0pwJ9.138$hT4.88155@newsfep1-win.server.ntli.net...
> > > KYOSHO CONCEPT 30 SR-T : SC.32H Mk.II Engine, Kyosho 1 Piece Muffler,
> CSM
> > > 180 Gyro, JR R700 7Ch PPM Receiver, 5 x JR517 Servos, Nicad, Zeal Hex
> > > Adaptor, NHP Carbon Tail Drive, Quick Boom, LOTS AND LOTS of Spares
> there
> > is
> > > almost enough to built another complete heli!, Good Condition (the
gyro
> > and
> > > Receiver and new and have only been flown 3 times!!! This heli is
> complete
> > > all you will need is a TX and starting gear and she's up up and
away...
> > >
> > > also here is a list of spairs might some parts that i havent listed
also
> > >
> > > have pic i can e-mail if required
> > >
> > > DO THE USUAL TO THE e-Mail Address and youll get through to me .....
> > >
> > >
> > > a.. Front and Rear main frame inc. aileron linkages
> > > a.. NHP Carbon tail drive
> > > a.. Cooling Ducting left and right side
> > > a.. Fuel Tank
> > > a.. Complete mast inc. Swash Plate
> > > a.. Swash Plate
> > > a.. Stock head Inc. Flybars, Paddles, Blade Holders etc
> > > a.. 2 sets of main drive gears
> > > a.. Tail Gearbox all gears
> > > a.. 2 Gearbox Housings Tail Blade Grips Etc.
> > > a.. Starter Cone
> > > a.. Cooling Fan
> > > a.. Engine Mount
> > > a.. Clutch
> > > a.. Clutch Bell Housing
> > > a.. Various Pushrods, Ball Joints, Bell Cranks etc.
> > > a.. There are enough spares here to cope with just about any failure.
> > >
> > > might be more that i havent listed also lol
> > >
> > >
> > >
> > >
> >
> >
>
>

[littlepiston]

still have it