Stargate+uNAV(Flight control system design)

[Scofield]

Hi ,Curt
Thanks for my help and make me get through the difficult calibration procedure .
I'm about ready to go on the Flight control system design and hope to get some assists from you .
I want to know how to do it on next steps , though between the Stargate and the uNAV have already been configureed.
My ICQ number:435767908

Regards

[clolson]

I think you'll be much happier with a gumstix than a stargate, and the stargate has been discontinued anyway.

I'm happy to answer specific questions and be as helpful as possible, but I just don't have enough available free time to walk people through the entire step by step process of building an MNAV based uav.

For the flight control software, you should be able to run MicroGear ... it's been tested in a conventional airframe and a flying wing airframe.

Regards,

Curt.

[bdooley]

You know getting a handle on this stuff is proving to be a lot more dificult than I hoped for. I'm part of a team and we plan to get something up and running the ultimate goal is fully auto flight w/ground control and live video/data feed back from the uav.

There is so much discussion and getting a handle on reading old discussions for information is hard becuase there are a lot of ways to go with building out systems, especially from scratch. What I find is I start to get something then I read a newer post that talks about newer better hardware.

The dream I have is to stumble upon a cookbook that does not necessarily cover each and every step but has enough to provide you a basic system.

Thanks for the listen,
Confused!

[Scofield]

Thanks for your suggestion ,i will study hard at the Flight control system .
Don't give up !
Regards