The Don
Nov 24, 2007, 05:57 PM
Precision machined aluminum motor standoff adapter. This is the same adapter sold with the Wicked EDF and WICKED EDF Extreme motors. Can also be used on other motors and DIY motor kits with 3mm shafts such as the Custom CDR double and triple stator kits or similar. Comes with high speed ZZ grade bearing already installed.
The adapter fits inside the Alfa, Hyperflow, XF, SF, Wattage, and GWS fans. (and probably more once I test them out)
Adapter length is 1.250" (31.75mm)
Hole spacing is the industry standard 16mm and 17mm and the threaded holes are 3mm threads on 16mm and 17mm spacing.
Includes:
Aluminum adapter
3mmx 6mm bearing (pre-installed)
3mm x 72mm shaft
Two 3mm x 6mm socket head cap screws (for motor side)
Two 3mm x 6mm button head screws (for fan side)
See the adapter mounted in various fans here:
http://www.rcgroups.com/forums/showthread.php?t=773185
More details at:
http://donsrc.com/cart/index.php?act=viewProd&productId=54
Don
The adapter fits inside the Alfa, Hyperflow, XF, SF, Wattage, and GWS fans. (and probably more once I test them out)
Adapter length is 1.250" (31.75mm)
Hole spacing is the industry standard 16mm and 17mm and the threaded holes are 3mm threads on 16mm and 17mm spacing.
Includes:
Aluminum adapter
3mmx 6mm bearing (pre-installed)
3mm x 72mm shaft
Two 3mm x 6mm socket head cap screws (for motor side)
Two 3mm x 6mm button head screws (for fan side)
See the adapter mounted in various fans here:
http://www.rcgroups.com/forums/showthread.php?t=773185
More details at:
http://donsrc.com/cart/index.php?act=viewProd&productId=54
Don