Trex Swash Adjustment

[LILYOTA9]

PLS HELP, I JUST CHANGED MY TREX FROM THE DX-6 TO THE SPECTRUM DX-7 AND THE AILERON MOVEMENT IS BACKWARDS, I TRIED REVERSING THE SERVO AND NO CHANGE, I THINK IS A CPM PROBLEM BUT I DONT KNOW WHAT TO CHECK :confused:

[heliboy88]

I think you meant aileron is that 2 servos are not working the right way and not just the aileron servo. Just go into the ccpm menu which you can adjust the travel of the aileron, elevator and pitch, and decrease the value on aileron until it becomes negative(if it's positive now), don't forget to see how much % you should get to have the aileron pitch you think comfortable with, but i suppose you're just starting to setup the heli, so just go from positive 50%(default) to neg. 50% and start from there. Hope that helps. Good luck.