Look over that New Heli with an Eagle Eye!!

[3DFalcon]

I just got my new Falcon 400SE 3D . I stell need to buy some set up tools and haven't charged up the battery yet . (thank God) I am new at CP Heli's .
Looking over the Heli's seeve's & Collar's on the main rotor bearing block There Looks to be two set screw's missing ( not sure ) But without them the servo that work's the blade pitch won't work can't make the Wire go up or
down..( Am I Right or Wrong ?? ) I was able to find a photo of a Falcon.
My Heli was shiped with out Thay say that thay test each and every one
befor shipment (LoL) :D If I would have started that thing up in the house :eek:
Having A hard finding 3x3MM set screws. ( $5.00 dollar shiping )
is a killer. Any one out there Help.

[critters]

I just got my new Falcon 400SE 3D . I stell need to buy some set up tools and haven't charged up the battery yet . (thank God) I am new at CP Heli's .
Looking over the Heli's seeve's & Collar's on the main rotor bearing block There Looks to be two set screw's missing ( not sure ) But without them the servo that work's the blade pitch won't work can't make the Wire go up or
down..( Am I Right or Wrong ?? ) I was able to find a photo of a Falcon.
My Heli was shiped with out Thay say that thay test each and every one
befor shipment (LoL) :D If I would have started that thing up in the house :eek:
Having A hard finding 3x3MM set screws. ( $5.00 dollar shiping )
is a killer. Any one out there Help.

If you have a picture of yours it would be easier. If your heli doesn't have what the picture has then yes, you are missing something. Where did you buy it from? If you got it from Mike at KA-Planes or Hobby Lobby, they will probably help you out but if you got it off of ebay or used then you'll have to expense it.

There is a big Falcon3D thread on RCU and here too at RCG. You should check out those threads and those are the places I would suggest you shoot your questions at.

RCUniverse (http://www.rcuniverse.com/forum/m_4436222/mpage_1/key_/tm.htm)

RCGroups (http://www.rcgroups.com/forums/showthread.php?t=642411)

[3DFalcon]

Thank you . Yes it was missing two set screws I now have in place . getting the rest of the heli setup .