PDA

View Full Version : Discussion adj reg

randynsaudi
Oct 05, 2007, 02:11 PM
Looking for something i can plug into my 14 volt power suppy and be able to adjust the voltage .. anyone have any idea's ?..just need something i can plug in and can vari the voltage
jeffs555
Oct 05, 2007, 02:48 PM
Not enough info. Current? Output voltage range? Power supply type?
randynsaudi
Oct 05, 2007, 03:11 PM
looking for some way i could turn down the voltage to use my Cell-pro 4 with this power suppy on the bench
kit
Oct 05, 2007, 08:19 PM
Putting 3 x 5 amp diodes in series with one of the leads will drop the voltage about 1.8 volts, allowing it to work with the Cellpro.
jeffs555
Oct 06, 2007, 02:23 AM
Like kit said, the simplest thing would be diodes. If you don't have any, just stop by radio shack and pick up these. http://www.radioshack.com/product/index.jsp?productId=2062591&cp=2032058.2032230.2032269&parentPage=family
rc404
Oct 06, 2007, 07:45 AM
For the Cellpro 4S that is on the FMA website now, the manual says it needs a minimum of 5 amps. Your supply is rated at half of that. Suggest you check your manual to see what is the minimum current required by the charger.
kit
Oct 06, 2007, 08:49 AM
These are a little cheaper...

http://www.allelectronics.com/cgi-bin/item/D660/205100/RECT_DIODE_6AMP_600PIV_.html