Need help with Hitec HFS-05MS RX

[jules3542]

I have found the perfect RX! It's cheep, light weight and completely glitch free at the fields I fly at, it's the 5ch HFS-05MS from Hitec (no I don't work for Hitec).

The unit is channels 1 to 4 plus channel 6 and there in lies my problem as I use a Multiplex SX TX and so my second aileron channel is channel 5. :eek:

Does anyone know if it is possible to modify this RX to use cannels 1 to 5?

Any and all help gratefully recieved (no pun intended :p ).

Thanks,

Julian

[A.T.]

I have found the perfect RX! It's cheep, light weight and completely glitch free at the fields I fly at, it's the 5ch HFS-05MS from Hitec (no I don't work for Hitec). The unit is channels 1 to 4 plus channel 6 and there in lies my problem as I use a Multiplex SX TX and so my second aileron channel is channel 5. :eek: Does anyone know if it is possible to modify this RX to use cannels 1 to 5? Any and all help gratefully recieved (no pun intended :p ). Thanks, Julian
HFS-05MS in depth pictorial review (http://webx.dk/rc/RX-measurements/Hitec-HFS-05MS/05ms.htm)
Better to use the mixing capabilities of your TX.
1. Refer a) fig 12.3 top left page 20 of your MPX Cockpit SX Manual (http://www.multiplex-rc.de/cms/vorschau/upload/d_anleitungen/t_cockpit_sx_v1_gb.pdf) b) 13.7.2 page 27 which show set up for elevons...
c) 15.10.3 Deltas anf Flying wings using Ch1 & 2.
2. 13.8.1. Combi-Switch mixer - Menu: (MIXER) COMBI. Mix Ch 6 100% with Ch 5
Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links (http://homepages.ihug.co.nz/~atong)