need help finding adapter

[cdxanti]

I have a electric motor for an outborad motor but no way to attach the flex shaft to it. please help me. if you need to know the lower unit is a K&B 3.5 outborad.

[toesup]

I have a electric motor for an outborad motor but no way to attach the flex shaft to it. please help me. if you need to know the lower unit is a K&B 3.5 outborad.

http://www.offshoreelectrics.com/products.php?cat=68

[cdxanti]

i have no idea how to mesure the motor shaft width
and the coupler has to fit in the lower K&B unit

[cdxanti]

heres a pic

[Kmot]

You must make a bracket that bolts to the top of the lower unit, that will support the motor. Generally, motor shafts are 3mm.

[green-boat]

Years ago there used to a kit available to do this conversion. The motor was mounted on a plate which was held up by stand-offs (4) which in turn was bolted to the lower unit. The stand-offs held the motor up and provided space for the coupler. From there it was a flex cable down to the prop.

The electric race boat guys may know where to find the kit or even if it is still available.