spadforme
Jun 12, 2007, 05:03 PM
This is a 12cell Crumbgrabber rigger. It has gone 69.7mph with a Octura 2137/3 prop on 4s Hyperion 3700's and a Geko GPS taped to the top of it. Theres no telling what it would do with out the gps and with the turn fin removed. Check out the video prooving the speed.
http://www.rcuvideos.com/item/KXZ7JR8ZGQ17G4T9
It will come with a 6xl, Castle Creations Baracuda 125 with cooling fan (motor and ESC have 6mm plugs), Hitec 225mg servo, Crumbgrabber hardware, Huge polished turn fin, prop shaft, coupler, switch and harnes, and stand if I can get it apart. The Carbon fiber booms have a repair on them. This repair was done before the 70mph passes and is no problem. I was going to replace the CF booms with aluminum but after the repair I decided it wasn't needed. You will need your rec, bat, and prop and thats all you will need to get this thing smoking on the water. I will let it go for $400 shipped anywhere in the lower 48. Paypal users please add 3% to cover fees.
I forgot to mention that there are a couple of small chips on the rear corners of the hatch. My buddy didn't take off all the tape before he pulled the hatch off. It doesn't leak, the rear tape covers them, you can barely see them in the first picture.
http://www.rcuvideos.com/item/KXZ7JR8ZGQ17G4T9
It will come with a 6xl, Castle Creations Baracuda 125 with cooling fan (motor and ESC have 6mm plugs), Hitec 225mg servo, Crumbgrabber hardware, Huge polished turn fin, prop shaft, coupler, switch and harnes, and stand if I can get it apart. The Carbon fiber booms have a repair on them. This repair was done before the 70mph passes and is no problem. I was going to replace the CF booms with aluminum but after the repair I decided it wasn't needed. You will need your rec, bat, and prop and thats all you will need to get this thing smoking on the water. I will let it go for $400 shipped anywhere in the lower 48. Paypal users please add 3% to cover fees.
I forgot to mention that there are a couple of small chips on the rear corners of the hatch. My buddy didn't take off all the tape before he pulled the hatch off. It doesn't leak, the rear tape covers them, you can barely see them in the first picture.