USB Interface for Walkera PCM, most PPM, and many CCPM transmitters

[bluesky123]

We are happy to introduce Version 4 of our USB interface:
http://milehighwings.com/index.php

With the addition of Walkera PCM, the new interface now supports the widest range of transmitters, including CCPM transmitters of many popular EP helicopters. We have enhanced our unique CCPM "de-mixing" algorithm and increased the precision of the PPM signal processing to 10 bits (internally, the interface operates with 16-bit data).

Another unique feature of Version 4 interface is addition of 'PPM Output' and 'ESC Programming' modes.

To use the interface with a different transmitter, you just need to change the TX cable and re-calibrate the interface.

Boris
MileHighWings

[bluesky123]

A couple more words to better describe the new features:

'PPM Output' mode is when the computer generates the channel signal and sends it to the transmitter, as if it's the slave TX in a Master/Slave pair. If the Master transmitter has its Trainer switch flipped, the computer-generated signal is transmitted into the air. If you pre-record the channel signals, you can play them back later.

'ESC Programming' mode is just that: the computer controls the ESC. In this mode, you can either program the ESC (basically, any stick-programmable ESC) or play a throttle program.

Boris