IanA
May 09, 2007, 10:27 AM
Hightorque is marketing an inexpensive device designed to help model enthusiasts protect their expensive Lipoly battery packs. It is dangerous to discharge these cell to below 2.5V. Doing so will permanently damage the cells.
Our Lipo-Flash low level indicator, will help you protect them.
• Suitable for use on packs from 2 to 5 cells.
• Easy to fit and set up.
• The LED starts flashing at between 3.3-3.2V.
• The LED will light up continuously if voltage drops below 3.0V.
Colour = Green
Weight = 0.10oz(3gram)
Dimensions:
LED unit = 2.25in(55mm) x 1/2in(12mm) x 3/8in(10mm) (Max outside measurements)
Wires = 15in(38mm) long
Priced at $17.00ea
a small price to pay for peace of mind
Hightorque USA
Phone: +44 (0) 1525 385835
Email: hightorqueusa@aol.com
Web: http://www.high-torque.com/usa
W
Our Lipo-Flash low level indicator, will help you protect them.
• Suitable for use on packs from 2 to 5 cells.
• Easy to fit and set up.
• The LED starts flashing at between 3.3-3.2V.
• The LED will light up continuously if voltage drops below 3.0V.
Colour = Green
Weight = 0.10oz(3gram)
Dimensions:
LED unit = 2.25in(55mm) x 1/2in(12mm) x 3/8in(10mm) (Max outside measurements)
Wires = 15in(38mm) long
Priced at $17.00ea
a small price to pay for peace of mind
Hightorque USA
Phone: +44 (0) 1525 385835
Email: hightorqueusa@aol.com
Web: http://www.high-torque.com/usa
W