litespeed
Apr 27, 2007, 07:36 PM
Hi all,
I have a Senior Telemaster ARF that I just got together and then things went bad. I was triming it out and checking out my power wattage and I broke the rear frame right in front of the rudder/elevator wings. Talk about a weak spot. What happened was I powered it up, pulling 1250 watts and let off and it rolled back a bit and then I hit it again not noticing there was slack between the horizontal wing and my holder thingie and crack!!!
I'm kinda a novice plane guy and was wondering if you all could give me some fix it advice. I took some pictures to show all.
Tom
B.T.W. I'm running a Rimfire 50-65-300, CC45HV, UBEC and a 16-8 prop pulling 1250 watts on a 10s1p a123 pack. I know it's too much power but I needed a motor that I could run my 10s1p a123 cells on so I didn't need special packs for each thing. I run 2 of these 10s1p a123 packs in my e620 Raptor. According to motorcalc it should run for 20 mins + at nice steady flight and about 5 mins at full throttle. Imagine that, light 3D in a Senior Telemaster!!!
I have a Senior Telemaster ARF that I just got together and then things went bad. I was triming it out and checking out my power wattage and I broke the rear frame right in front of the rudder/elevator wings. Talk about a weak spot. What happened was I powered it up, pulling 1250 watts and let off and it rolled back a bit and then I hit it again not noticing there was slack between the horizontal wing and my holder thingie and crack!!!
I'm kinda a novice plane guy and was wondering if you all could give me some fix it advice. I took some pictures to show all.
Tom
B.T.W. I'm running a Rimfire 50-65-300, CC45HV, UBEC and a 16-8 prop pulling 1250 watts on a 10s1p a123 pack. I know it's too much power but I needed a motor that I could run my 10s1p a123 cells on so I didn't need special packs for each thing. I run 2 of these 10s1p a123 packs in my e620 Raptor. According to motorcalc it should run for 20 mins + at nice steady flight and about 5 mins at full throttle. Imagine that, light 3D in a Senior Telemaster!!!