jeti spin 99 parameters

[mannyh]

Does anyone have any experience or input to set the spinbox params :cool:
Im turning an axi 5345/16 on 12s (2x6s 4500mah)
Seems to run up fine on default setting but Who knows what Im missing :)

Im setting up an aeroworks 50cc size yak!
22x10 prop hopin for 3d setup :D

manny

[Jocke]

Recomend you to contact/mail motor manufator for correct settings, there are manny parameters to sett on the SPIN ;)

[Ed Lyerly]

Manny,
You may be over-propped a bit. Here is some test data from the AXI 5345/16 in my 15 lb CG Obsession ARF conversion. I'm using a Jeti Spin 99, and 12S 1P 4600 TP Exterme lipos (timing 34 degrees, switching 8 kHz):
APC-E 20x10 = 62 amps, 44.5v, 2750 watts, 7,050 RPM
APC-E 20x12W = 76 amps, 43.0v, 3250 watts, 6,800 RPM
Mejzlik(electric) 20.5x12W = 79 amps, 43v, 3350 watts, 6700 RPM
Ed