Running Sim from JR 8103

[outback_2007]

I had asked earlyer if I need to remove my antenna or anything when useing my jr 8103, to run micro-gadget interlink????????

[skirtz]

When using any sim cable, you need to remove the Tx box at the back of the transmiter. This achieve two goals:
- You are not transmitting for no reson (and your neibor can fly his plane on the street)
- Your Tx battery will last much longer - up to 8 hours or more.

If you do not remove the Tx box and have the antena collapsed while flying a sim, some Tx can even get damaged.

Stefan
http://rcflightsim.com

[outback_2007]

Thanks very much, I'll be shure and take your advice.