Airbus A310

[Bartek]

Does anyone have or had any interest in building a scale airbus a310, possibly using a 6 channel radio or higher? :) It's soo hard to find any links to modeller's who might have this kind of interest. Even pictures from the links would be fine. The only site i know so far that has these kind of pictures is Norbert Rauch's site. Please HELP!

[Kapnos]

There are only a few sites about scale airliner planes. The A310 is not very popular for modelbuilders and I would be surprised if you could another site beside Norbert's. From my knowledge it's the only one worldwide with pics of A310s.

What will be the size of your A310?

[OhioMike]

Its not a 310...but its close.????....http://www.aerosquare.com/aerosquare_en/technique_en/a320_01_en.htm

[Bartek]

40 inch span, air transat new scheme, two edf fans, full interior work, seats, cockpit etc... Im planning to place my camera inside to get a view from the passenger window.
Suspensions on landing gear etc. All plans right now. Just got plans now but started work on the wing! I will upload pics as soon as i get some!!

[Ben_E]

There are quite a few of us interested in EDF airliners, and many has got the E-flite Airliner. Lots of info on it on the forum

Ben_E

[ScalePilot727]

I REALLY LIKED THE AIRBUS 320 ON AEROSQUARE BUT I HAVE NO TIME TO BUILD ONE IS THERE ANY PLACE I CAN BUY ONE ARF.
MY FAVORITE MODELS ARE MD-80 DC-9,727,747,DC-10.a-380

[ScalePilot727]

HERES A LINK TO AN AIRLINER PAGE THEY GOT SOME AIRLINERS!!!!!!!!!
www.edfmodel.com

[Bartek]

LOL that's the most obvious and popular one.

[Bartek]

I don't think this aircraft is so popular for modellers.

[Tram]

I'd like to have either an A-300 or a 727..

[Bartek]

why? The a310 is so fat and beautiful when it lands. oh and the wingtips...

[Tram]

Yeh, the 310 is nice..

I like the 300 better.. It's supposedly also nicer to fly.. :D

[Bartek]

yeah but i dont like the spoilers and the wingtips...

[ScalePilot727]

I Want One !!!!!!!!!!!!!!!!!!!!!!!1

[Grumman]

I would like to have a Boeing-747 EDF, I may try to make a scratch one. I have heard that there was one available a few tears back...
I'll keep looking... Any info guys???
Thanks,
Maurice :)

[Grumman]

40 inch span, air transat new scheme, two edf fans, full interior work, seats, cockpit etc... Im planning to place my camera inside to get a view from the passenger window.
Suspensions on landing gear etc. All plans right now. Just got plans now but started work on the wing! I will upload pics as soon as i get some!!

Where can you buy these plans???
Thanks,
MOJO

[ScalePilot727]

GRUMMAN:

I MAKE KITS

JUST VISIT MY FORUM AT

http://www.rcgroups.com/forums/showthread.php?t=688797
OR
http://www.rcgroups.com/forums/showthread.php?t=684486

[mc2th]

Does anyone have or had any interest in building a scale airbus a310, possibly using a 6 channel radio or higher? :) It's soo hard to find any links to modeller's who might have this kind of interest. Even pictures from the links would be fine. The only site i know so far that has these kind of pictures is Norbert Rauch's site. Please HELP!
Have you checked with Ian at :
edfmodels.com

[Monkfish81]

I fully agree that it would be amazing to have a good ARTF A310. It would be such a good aircraft to see in the skies with its plump fuselage. One of my favourite kits is the Art-tech cessna 182, because despite being foam they fly really well and look superb. Imagine if you could buy an art-tech style A310 kit ?

[Justice]

How about this then?! :cool:

http://www.e-fliterc.com/Products/Default.aspx?ProdID=EFL7000

[tommyt]

GRUMMAN:

I MAKE KITS

JUST VISIT MY FORUM AT

http://www.rcgroups.com/forums/showthread.php?t=688797
OR
http://www.rcgroups.com/forums/showthread.php?t=684486

Oh my God :eek: Here we go again :mad:

WARNING WARNING WARNING WARNING WARNING WARNING

Going to these threads will cause you to waste an incredible amount of time.

You've been warned.......

[blucor basher]

Yeah, but it was *fun* waste of time. Me, I'm amazed that anyone was even thinking about sending any money...

[Bartek]

Where can you buy these plans???
Thanks,
MOJO
I custom print them for my project. Fuselage & wingsa tailplane engines etc... :)